Whats your 2012 goal's?
I have been quite on here lately. Just needed a break. Ordered some new clutch disk's today, started the car for the first time in 2 months and cleaned it up. Not making any major changes so my goal is still to hit the 9's. I should mention this will be the 4th season on this motor unopened. I plan to race in 5 events this year and maybe hit one up north that Anthony mentioned.
Who is chasing what? |
runs
Originally Posted by sk8world
(Post 10951821)
I have been quite on here lately. Just needed a break. Ordered some new clutch disk's today, started the car for the first time in 2 months and cleaned it up. Not making any major changes so my goal is still to hit the 9's. I should mention this will be the 4th season on this motor unopened. I plan to race in 5 events this year and maybe hit one up north that Anthony mentioned.
Who is chasing what? good luck |
My goal Retore my baby this year and run,, I dont care if is 15seconds lol, having the car in the starting lane will be my biggest goal this year,
|
9 Second all motor pass
|
Hopefully a fat tax return will get me much closer to my goal. I go pick up a key piece to the puzzle this weekend :) I am talking with a good friend about painting the car the car this winter and hopefully get it down the track a few times this year. I don't plan on pushing it beyond low boost till maybe MIR. I just want to go out and have some fun with friends!
|
Sounds good guys! Were are the rest of you? Still too cold for some of you I guess!
|
Mu goal is to actually work on my car. I did begin stripping it over the last few weeks. When I have time, this week or maybe next, I'll pick up the 4-link back-half kit and go to work on that. Figure if I can get the front and rear suspension together this year I'll be happy.
|
Originally Posted by sk8world
(Post 10952688)
Sounds good guys! Were are the rest of you? Still too cold for some of you I guess!
|
You better stop that BS Anthony and race at the major events...lol
|
My goal is to finally get out of the damn 11's been stuck there too long. Also may race in the top street points season at Englishtown.
|
uhhh!!! finish my car and open the shop soon soon soon
|
Have the exterior and interior completed on my all motor car. And if I get lucky, the front and rear suspension done too... Or at least finish the rear end work.
|
mine is to run 10.25 lol
|
Paint my Rx3 and maybe install a 20b it in.... If no 20b then throw in that REW semi pp motor that's been on the shelf since Jesus was a baby. Seeing that I'm an inconsistent person, the Rx3 will probably stay there and I would put my time into another piece of junk
|
Originally Posted by sk8world
(Post 10951821)
Ordered some new clutch disk's today
|
to help my son run 10s with his all motor street car
|
My plan is to run an 8 in my street car - on pump gas!
|
my goal is to get a few bugs worked outta my car (install line loc, rebuild throw out bearing, and get my trailing 2 spark working again) and turn the boost up a little, hopefully by the end of the season get a 9.6x out of it..
|
Originally Posted by JZG
(Post 10955525)
My plan is to run an 8 in my street car - on pump gas!
|
son
Originally Posted by drag 7
(Post 10955297)
to help my son run 10s with his all motor street car
im trying to get this rx8 is about 10 hrs away I want it for my son his only 12/13 but his 1st car he drove was a rx7 and e was 8 people crack up when they see him moving my cars I love it., I told him I want him doing good in school and his reward is to race in the track if he wants no pressure. he loves baseball for now lol |
Originally Posted by chino_rx3
(Post 10955611)
thats cool real cool
im trying to get this rx8 is about 10 hrs away I want it for my son his only 12/13 but his 1st car he drove was a rx7 and e was 8 people crack up when they see him moving my cars I love it., I told him I want him doing good in school and his reward is to race in the track if he wants no pressure. he loves baseball for now lol Thats cool! I plan to do the same. Not sure on car (s) for them yet. |
Originally Posted by killahrx7
(Post 10954282)
mine is to run 10.25 lol
Did you go to the last showdown event were the GTR was running 9.4's? DAMN! |
Goal - 11's
Well see how long the stock SE rear holds up. |
Hmmm 2012....
Get front subframe blasted & coated. Get steering rack shaved/painted Blast/ paint all the brackets nuts, bolts in engine bay Buy rest of items to build engine/ put engine in Make exh. mani Mod intake for more injectors Cage Get car in primer Wire the car get it running and the list goes on and on....kinda like the song. Get a idea of the sitiation... https://www.rx7club.com/build-threads-294/vert-restoration-101-heavy-update-2014-a-893883/page5/ |
rotaries
Originally Posted by sk8world
(Post 10955842)
Thats cool! I plan to do the same. Not sure on car (s) for them yet.
|
Originally Posted by sk8world
(Post 10955571)
Sounds badass, tell us about the car!
https://www.rx7club.com/auxiliary-injection-173/my-pre-turbo-wi-974884/ |
for 8's? |
I think I mentioned to you earlier that I want to be quicker than 10.3 on pump gas. I maybe looking to get my son a FD. He is 15 now. I'm looking for something close to stock to be on the safe side fro a young driver. It'll be fun for us to work on together.
|
Originally Posted by vincentrx7
(Post 10959397)
I think I mentioned to you earlier that I want to be quicker than 10.3 on pump gas. I maybe looking to get my son a FD. He is 15 now. I'm looking for something close to stock to be on the safe side fro a young driver. It'll be fun for us to work on together.
|
Originally Posted by sk8world
(Post 10959331)
What are you changing to go from 10.12 to shoot
for 8's? |
2012 goals:
*Get back behind the seat of a daily driven RX-7. (Needs inspection, reg, tires...) https://www.rx7club.com/build-threads-294/89-vert-daily-driver-project-973460/ *Get the 10thAE off the backburner and hopefully have it cranking over by the end of Nov. 13B-RE, GT4202, Q16, hopefully sub 2200lb race weight. |
Slicks and a New clutch, Aiming for that 11 sec pass everyday driver.
|
Originally Posted by sk8world
(Post 10959566)
How you doing Bobby? I spoke to Paul at liberty this week and he mentioned you. We talked about the shafts and they are in the works of building more! Only down side is they will be a lower grade material. He says they will be plenty strong, just wasn't profitable using the old material.
Looking forward to getting to the track now with the line lock and 2 step working. I'd really like to get down to your times......Maybe I should just let you drive my car.LOL Take care man. |
Get the project up and running and hopefully completed within the year.
|
Originally Posted by vincentrx7
(Post 10962419)
Doing well. I think I will be moving to SE Georgia soon from Ohio. I really like Paul and I'm enjoying the tranny. I was going to get the upgraded shaft but he sold the last one before he got to mine. No problems so far in the mid 600 whp range.
Looking forward to getting to the track now with the line lock and 2 step working. I'd really like to get down to your times......Maybe I should just let you drive my car.LOL Take care man. |
Originally Posted by vincentrx7
(Post 10962419)
Doing well. I think I will be moving to SE Georgia soon from Ohio. I really like Paul and I'm enjoying the tranny. I was going to get the upgraded shaft but he sold the last one before he got to mine. No problems so far in the mid 600 whp range.
Looking forward to getting to the track now with the line lock and 2 step working. I'd really like to get down to your times......Maybe I should just let you drive my car.LOL Take care man. |
to run a 10
|
Originally Posted by just startn
(Post 10962650)
:( why?
|
Originally Posted by estevan62274
(Post 10955951)
Goal - 11's
Well see how long the stock SE rear holds up. |
Looking to get the FB into the 11's but I need to find my power for the NA Semi p-port setup first.
I will be moving over to Fuel injection this summer once I return from the desert. |
Originally Posted by ArmyOfOne
(Post 10968564)
Looking to get the FB into the 11's but I need to find my power for the NA Semi p-port setup first.
I will be moving over to Fuel injection this summer once I return from the desert. What carb you running right now? |
Gonna really go out on a limb and go for the crazy goal of ............... 8.90@15x
Jus added 2 more 1600cc inj raising boost to 40 psi & adding 50-75 shot!!!! And keeping the race weight of 2800 lbs!!! No tin can here baby!!!! |
kicking /\ azz :lol: :blush:
|
since were being optimistic im going for 10.80
|
Originally Posted by tearbo2
(Post 10968925)
Gonna really go out on a limb and go for the crazy goal of ............... 8.90@15x
Jus added 2 more 1600cc inj raising boost to 40 psi & adding 50-75 shot!!!! And keeping the race weight of 2800 lbs!!! No tin can here baby!!!! I want more info on the 50-75 shot. I have been considering this for years. What kit did you go with and what all is involved in the tune? |
my for this year is drop a second of my best time on my rx7. with the same setup i have
|
Originally Posted by sen2two
(Post 10968714)
What carb you running right now?
|
Get my FD into the 10's as she sits with FULL interior, A/C, PS and all the other creature comforts...
I changed to ET streets and knocked off .4 secs from my 1/8 mile times a few weeks ago... Haven't been to the track cause of some issues but hopefully she will see the track this week or next.. |
I hope to finally hit the track this year, I recently sold my touring and pick up a clean automatic base model that I plan to do the manual swap and put the parts that I have to good use. Look out for my s475 build coming soon.lol
|
I wanna quit doing research and reading this forum and actually start the build this summer.
|
All times are GMT -5. The time now is 04:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands