Weld Wheels Backspacing?
#1
Full Member
Thread Starter
iTrader: (3)
Join Date: Aug 2009
Location: Abilene TX
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Weld Wheels Backspacing?
So I did the search and found that people using the Weld Wheels are using a 15x8 with a 6.5 in back spacing. There was only one person who was using the 15x10 like I want to do and his name is LUPE. I would like to know what the backspacing is for the 15x10 and if they will clear the calipers. I have the rx7.com launch kit on the car and was wondering if I could squeeze a 315 drag radial under the car without having to cut on anything? Any help would be awesome thanks.
#2
Living life 9 seconds at a time
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
Eric had a ford rear with totally different backspacing. BTW, you'll need a 7.5 backspacing and still will have to grind the **** out of your caliper so it won't grind.
#3
Eats, Sleeps, Dreams Rotary
iTrader: (1)
So I did the search and found that people using the Weld Wheels are using a 15x8 with a 6.5 in back spacing. There was only one person who was using the 15x10 like I want to do and his name is LUPE. I would like to know what the backspacing is for the 15x10 and if they will clear the calipers. I have the rx7.com launch kit on the car and was wondering if I could squeeze a 315 drag radial under the car without having to cut on anything? Any help would be awesome thanks.
#5
Thread
Thread Starter
Forum
Replies
Last Post