RX7Club.com - Mazda RX7 Forum

Rotary Drag Racing The place to post your racing stories and info

Spool

Thread Tools
 
Search this Thread
 
Old May 17, 2009 | 09:51 PM
Share
  #1  
IO_303's Avatar
IO_303
Thread Starter
Full Member
Tenured Member 10 Years
iTrader: (4)
 
Joined: Jun 2005
Posts: 226
Likes: 0
From: St. Louis, Mo.
Spool
I am looking for a spool for my TII rear end. Is there anyone that makes one? I have tried searching, but on a board for turboed cars it makes finding the info kinda hard
Reply
0
Old May 17, 2009 | 10:06 PM
Share
  #2  
ultimatejay's Avatar
ultimatejay
Eats, Sleeps, Dreams Rotary
Tenured Member 10 Years
iTrader: (1)
 
Joined: Nov 2006
Posts: 4,148
Likes: 4
From: California
Originally Posted by IO_303
I am looking for a spool for my TII rear end. Is there anyone that makes one? I have tried searching, but on a board for turboed cars it makes finding the info kinda hard
I don't know of anyone. It's cheaper and easier if you just have the spider gears welded on your stock diff.- instant spool.
Reply
0
Old May 20, 2009 | 09:20 PM
Share
  #3  
mazda rx2 rotary's Avatar
mazda rx2 rotary
Full Member
 
Joined: Jan 2009
Posts: 219
Likes: 0
From: riverside ca
Spool
If you read the nhra rule book welding the spider gears is a big no no! If they ask about the diff you tell them
Reply
0
Old May 20, 2009 | 10:20 PM
Share
  #4  
ultimatejay's Avatar
ultimatejay
Eats, Sleeps, Dreams Rotary
Tenured Member 10 Years
iTrader: (1)
 
Joined: Nov 2006
Posts: 4,148
Likes: 4
From: California
Originally Posted by mazda rx2 rotary
If you read the nhra rule book welding the spider gears is a big no no! If they ask about the diff you tell them
Exactly, there's no way they would ever know what you have. Just play dumb and tell them it's stock.

Chris, see you tomorrow at the track. Yeeeeehaaaa!
Reply
0
Old May 20, 2009 | 11:45 PM
Share
  #5  
IO_303's Avatar
IO_303
Thread Starter
Full Member
Tenured Member 10 Years
iTrader: (4)
 
Joined: Jun 2005
Posts: 226
Likes: 0
From: St. Louis, Mo.
Hmmm, if noone makes a spool then I might have to go 4 linked 8.8 sooner than I thught.

i love my money pit
i love my money pit
i love my money pit
i love my money pit
Reply
0
Old May 22, 2009 | 09:56 PM
Share
  #6  
ultimatejay's Avatar
ultimatejay
Eats, Sleeps, Dreams Rotary
Tenured Member 10 Years
iTrader: (1)
 
Joined: Nov 2006
Posts: 4,148
Likes: 4
From: California
Originally Posted by IO_303
Hmmm, if noone makes a spool then I might have to go 4 linked 8.8 sooner than I thught.

i love my money pit
i love my money pit
i love my money pit
i love my money pit
That's your best bet because the stock axles would most likely grenade anyway.
Reply
0
Old May 23, 2009 | 08:22 AM
Share
  #7  
IO_303's Avatar
IO_303
Thread Starter
Full Member
Tenured Member 10 Years
iTrader: (4)
 
Joined: Jun 2005
Posts: 226
Likes: 0
From: St. Louis, Mo.
Originally Posted by ultimatejay
That's your best bet because the stock axles would most likely grenade anyway.
I guess its a good thing I got rid of my crappy wire feed, and bought a mig. This could be a good first project for it.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Good help needed with BorgWarner S300SX-E setup!
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM
Power FC Timing map peer review
nismorx7
Power FC Forum
6
Oct 1, 2015 10:36 AM
Electronic v mechanical boost control
WANKfactor
Single Turbo RX-7's
7
Sep 15, 2015 07:45 AM
Back to Subforum
Rotary Drag Racing
View Next Unread
Where have all the posters been lately ?




Advanced Search

All times are GMT -5. The time now is 09:44 PM.