Shopping list help
#1
Full Member
Thread Starter
iTrader: (3)
Join Date: Aug 2009
Location: Abilene TX
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Shopping list help
I have decided to go to a single set up and I am new to the rotary. I will start by saying that I would like to make a reliable 500rwhp using methanol as auxillary inj. Other than that what size and type of turbo/manifold/waste gate or waste gates should I use. The motor has a mild street port and 3mm seals. What is the best fuel system/ignition and ecu? Please help me out. I obviously want to make 500 hp and spool as fast as turboly possible. Thanks for any help.
#3
Stay tuned...
iTrader: (3)
Join Date: Jul 1997
Location: West Islip, Long Island NY
Posts: 2,917
Likes: 0
Received 1 Like
on
1 Post
I have decided to go to a single set up and I am new to the rotary. I will start by saying that I would like to make a reliable 500rwhp using methanol as auxillary inj. Other than that what size and type of turbo/manifold/waste gate or waste gates should I use. The motor has a mild street port and 3mm seals. What is the best fuel system/ignition and ecu? Please help me out. I obviously want to make 500 hp and spool as fast as turboly possible. Thanks for any help.
First start with your budget. That will limit your choices obviously. Some turbos go for $600 and some go for $1500.
Second, start with your tuner, ask the person who will be tuning your car for their opinion.
Once you have the basics setup, you can go from there.
I see you are in Texas, you have a few rotary guys down there and tuners. Call Ari @ RP, you also have BDC down there too.
#4
Rx2 > FD
iTrader: (10)
^exactly what he said
500 is no big deal these days. but you can spend twice the money by being misinformed. start by reading other peoples build threads and see what there results are. this will give you a general idea on what to do. if your still confused, speak to a pro in your area.
500 is no big deal these days. but you can spend twice the money by being misinformed. start by reading other peoples build threads and see what there results are. this will give you a general idea on what to do. if your still confused, speak to a pro in your area.
#6
Full Member
Thread Starter
iTrader: (3)
Join Date: Aug 2009
Location: Abilene TX
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Everytime that I search for threads I end up getting all kinds of threads totally unrelated to the topic that I am searching for. Guess I got a little discouraged with looking like that for info. I will keep searching.
Trending Topics
#8
Stay tuned...
iTrader: (3)
Join Date: Jul 1997
Location: West Islip, Long Island NY
Posts: 2,917
Likes: 0
Received 1 Like
on
1 Post
https://www.rx7club.com/search.php?searchid=8114920
This search was just "turbo" in the subject. (both searches were only in the single turbo forum).
https://www.rx7club.com/search.php?searchid=8114942
Go to the thread above of the fastest guys in the top 20 section and look at what turbos they are running and start checking how much they actually cost.
Good luck.
Anthony
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM