You Need the Automatic Balance...

 

Jose Román, Are you using 4 brake calipers on the rear discs brakes? I mean, 2 per wheel so as the brakes do'nt slip when you are staging? Are'nt you using a TransBrake for launching? I really do'nt understand, because when using a trans brake the valve body active first gear & reverse simultaniouslly, and the trans outputshaft is not sending torque to the rearend. Could you explain it, I will appreciate it.

 

By the way, there are quick time performance sfi certified bellhousings/scattershields to mount a C4(part number RM-4090) or AOD(part number RM-4092) to rotary engines!

 

Hi Objauto

Yes I using 4 caliper on the rear end and also Transbrake.....the Brakes its for the pre-stage I using a 3 step on 4,800 rpm when I make the RPM's I'm Moving to the stage and at this moment I Using the Transbrake and the 2 step on 7,200 rpm...OBJ...wait,wait,wait the green light ok,ok now cabooommmm 5.41 reaccion time....jejejejejejejejje....good Job.....


Omar a que joder un rato...jejejejejeje....esta pendeja funciona....diciplina

 

Thank you Jose. Let's see if I understand; You are loading the engine (with ignition timming advanced) agaisnt the torque converter with the rear brakes and the 3 step set up so as to buid boost, right? So, if I'm running allmotor I do not need to load the engine to build boost,right? So in a allmotor application I just need to use the transbrake to buid RPM to launch?

 

You Right!!!!! But If you Think to put a Automatic Transmission on a All Motor No Nitrous 13B engine For Drags Racing...No Working.....ecept W/NOS

 

The last weekend we broke the 6.07 personal record with a 5.98 et @ 113mph at 1/8 mile we make this record on the Arecibo Motorsports in Puerto Rico.

Thanks God, My Family,OHH My son Jose Jr., Davila performance, Lokito Killer mecanic &
nc transmission....

 

congrats man! One day I am getting a C4 from NC tranny.

 

Very nice!!! What was your 60 foot time?

 

Little update on my c4 automatic set up,well I smoked some clutches,I resealed and clutched the trans,I found that the out put shaft actually twisted a little at the front side of the splines,I new some thing was up because the last couple times I had the drive shaft out it would not slip all the way up against the tail shaft,this does not bug me it's just maintenance,but it screwed up my converter .it's a Neal chance converter bolt together unit,I broke 3 small chips off the pump side of the converter and layer the fins/vanes over.my race budget is very tight right now so I will repair it myself,contacted the builder about it,it would cost at least 600 to fix it,the trans is together just need to fix the converter,

 

When I start run the Rx7 the best 60 feet its 1.34 but we run 6.07 @112 mph but To Rich!!!!
When I Run 5.98 et the 60 feet its 1.43 et to agresive in the lounch at 7,100 rpm to Much Tire slip.....But I start to make adjusment on the lounch with the 2 step. 6,000rpm 1.38 60 feet & 5,800 rpm 1.37 60 feet.....for me its very impresive because its a mazda 13b at this low rpm we have Power with a 87 engine street port...

 

send me a picture from your open converter to see if i can help you

 

I can send some pics to your phone if it can accept pic messageing

 

Yes I accept
787-462-4925

 

Ok I will send a couple pics in the tomorrow

 

New Record for the RX7 named ''Rotormatic''.....8.72 @150 mph...w/ 1.21 60 ft..... 5.50 @1/8.... we run with the same tranny Powerglide 2 speed 13B 91 engine.....stock chassis 2,300 car wheight 28 X 10.5 W tires.....

visit www.nctransmission.com for more videos

 

Saludos Jose, nice to hear from you. It's been a long time. Congratulation on the new record. Valio la pena perseverar. What kind of rear suspension you are using: ladder bars or four links? Who's driving the car now?

 

We using Four links...now the driver is Yamil Davila this weekend My son is the driver.... I'm just the money bank...jejejejejejejejeje...And the powertrain creator...

 

New record for rotormatico: 5.40@125mph in the 1/8mile. Congratulations.

 

Tranny prices? Pm sent

I know bacon is hot for an auto. Share the info

 

And I just started to try to justify the gf2000 to myself lmao yea share!! Share!

 

Damn.. I have been waiting for your auto set up to come out! I figure with the guys up in that area you could get a combo working well? Why did u sell ernies old combo? I figured that was the clue u were going auto! My tranny is back at liberty getting freshened up. Was thinking after I get my s475 Tuned an auto would be soon to follow.

 

Well Jim is still trying to get his th350 dialed in, was having problems with his tec3 so he hasn't made a clean pass on it, he on team microtech now so we should see a pass soon enough...trust me I haven't given up.. I have my geArset storing and waiting for my reinforced tranny case to come back.,, I've been delaying b/c still think the automatic a viable option (as above proves) just have personal reservations on only having 2 speeds (pg) and that the c4 robs more power than the th 350, the th350 also seems to have better gearing, even though I know the great ing isn't like a manual trans... This is a great thread with alot of good info

 

Thanks OBJ......Yes this last Saturday @ the Arecibo Motorsports we make some testing driver @ car...First My Son Jose Jr. make hes first 3 past with the new modification on the chassis and engine on the rotormatic.....on hes 3rd past Caboommm.... 5.40 @ 125mph ....w/1.23 @ 60 ft....

Thanks our Team, Davila performance programer,chassis builders,driver,chassis adjustment,engine ports.... Valdo Rodriguez engine build,My wife for support our team, my daughter pitman and My son el Fiebru Mayor.....Next step this saturday 1/4 mile Salinas will see what happend...In God we Trust....

 

Video 5.40 et

rotor-matic 13b automatic 5.40 et 125 mph @ 1/8 - YouTube