PAC Performance/GAS Motorsports etc. Videos!!!
#1
'Tuna'
Thread Starter
PAC Performance/GAS Motorsports etc. Videos!!!
Here is a video showing multiple runs from Pac Performance's shop cars and many other racers from down under!
http://www.youtube.com/watch?v=bAoiReCo1o0
http://www.youtube.com/watch?v=bAoiReCo1o0
#3
Awesome Vid...thanks Crispeed!
Aussies and PR's are really getting their suspension dialed on those small-wheelbase cars (i.e. Starlets, R100's)...those things are running straight as **** for the most part!
That GasMotorsports 2JZ sure is a force to be reckoned with....consistant high 6's!....damn supra motors!
Aussies and PR's are really getting their suspension dialed on those small-wheelbase cars (i.e. Starlets, R100's)...those things are running straight as **** for the most part!
That GasMotorsports 2JZ sure is a force to be reckoned with....consistant high 6's!....damn supra motors!
#4
InsaneRotaries.com
http://www.switchpod.com/users/speed...elli16July.mp3
Last edited by RoTaRyBoYz; 07-24-08 at 11:32 PM.
#5
Well seeing that it ran consistant 6.50's when it lived in the US, its about time it showed its full potential... In a radio interview with the owner/driver, he said its only turned up to 1600hp, till things are fully sorted.... BTW it made a little over 2000hp on an engine dyno
http://www.switchpod.com/users/speed...elli16July.mp3
http://www.switchpod.com/users/speed...elli16July.mp3
#6
InsaneRotaries.com
3.4L All turbo on 50+ lbs with methanol...no spray as far as I know
http://youtube.com/watch?v=0Ta6hXZkKIw
http://youtube.com/watch?v=0Ta6hXZkKIw
Trending Topics
#8
InsaneRotaries.com
Yea i know its a little on the low side
These days 50lbs is considered industry standard When you reach 70-80lbs then you're cooking with gas
Keep your eye on the boost gauge
http://www.youtube.com/v/8sjrmI5pN9k&hl
These days 50lbs is considered industry standard When you reach 70-80lbs then you're cooking with gas
Keep your eye on the boost gauge
http://www.youtube.com/v/8sjrmI5pN9k&hl
Last edited by RoTaRyBoYz; 07-25-08 at 12:35 AM.
#9
....you wouldn't happen to know if they are using standard ARP studs/or the like to keep the head on? I have a few Honder buddies at 30+lbs. but they are blowing head gaskets around 35lbs.
Thread
Thread Starter
Forum
Replies
Last Post