PAC PERFORMANCE 6.84@201mph video!!!!
#1
'Tuna'
Thread Starter
PAC PERFORMANCE 6.84@201mph video!!!!
The good old boys from down under have done it again. Most consistent & reliable 3-rotor in the world!
New PB for them with a 6.84@201mph from the 20B powered MX-6.
Huge congratulations for George, Rocky and the rest of the PAC crew!!!!!!!
Here's the video.
http://www.youtube.com/watch?v=qTrmcLCr-wA
Can only speculate the performance advantage the new chassis is going to provide over the present MX-6.
The latest addition to the PAC team!
The body.
The chassis. Looks familar!
More info in here.
http://www.pacperformance.com.au/blo...04/25/988.aspx
New PB for them with a 6.84@201mph from the 20B powered MX-6.
Huge congratulations for George, Rocky and the rest of the PAC crew!!!!!!!
Here's the video.
http://www.youtube.com/watch?v=qTrmcLCr-wA
Can only speculate the performance advantage the new chassis is going to provide over the present MX-6.
The latest addition to the PAC team!
The body.
The chassis. Looks familar!
More info in here.
http://www.pacperformance.com.au/blo...04/25/988.aspx
Last edited by crispeed; 05-07-08 at 02:52 AM.
#2
InsaneRotaries.com
Yes sir, the most consistent, reliable 20b in the world
They say they haven't added full power to the Mx6 because of the chassis, so one can only imagine what the new time would be with this new car
Very smart guys.. Start with a basic tune up and slowly add to it, that way you will slowly get the bugs and design flaws out the "worst design rotary mazda made"
They say they haven't added full power to the Mx6 because of the chassis, so one can only imagine what the new time would be with this new car
Very smart guys.. Start with a basic tune up and slowly add to it, that way you will slowly get the bugs and design flaws out the "worst design rotary mazda made"
#3
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Yes sir, the most consistent, reliable 20b in the world
They say they haven't added full power to the Mx6 because of the chassis, so one can only imagine what the new time would be with this new car
Very smart guys.. Start with a basic tune up and slowly add to it, that way you will slowly get the bugs and design flaws out the "worst design rotary mazda made"
They say they haven't added full power to the Mx6 because of the chassis, so one can only imagine what the new time would be with this new car
Very smart guys.. Start with a basic tune up and slowly add to it, that way you will slowly get the bugs and design flaws out the "worst design rotary mazda made"
#5
'Tuna'
Thread Starter
Rocky and George are two of the coolest, knowledgeable persons I had the pleasure of meeting. That team is going to take the rotary motor to the highest performance level obtainable and gain the respect of fellow racers along the way also. One thing you can be assured about is that those two are 100% loyal to the rotary motor and would not jump ship and take the easy way out. They would retire and stop racing before that ever happened.
#6
InsaneRotaries.com
George was very clear about the future of PAC performance in this interview.... He said he will never run a 2JZ
his comments are around the 11min mark..
http://media.switchpod.com/users/spe...rgeRahayem.mp3
his comments are around the 11min mark..
http://media.switchpod.com/users/spe...rgeRahayem.mp3
#7
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Rocky and George are two of the coolest, knowledgeable persons I had the pleasure of meeting. That team is going to take the rotary motor to the highest performance level obtainable and gain the respect of fellow racers along the way also. One thing you can be assured about is that those two are 100% loyal to the rotary motor and would not jump ship and take the easy way out. They would retire and stop racing before that ever happened.
sticking with the rotary. Mad props to them and I 'm sure they will have some sweet rewards when it's all said and done.
Thread
Thread Starter
Forum
Replies
Last Post