mazda drag truck with 13b
#1
Full Member
Thread Starter
Join Date: Oct 2008
Location: new jersey
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
mazda drag truck with 13b
here is my 88 mazda b2200 race truck all steel . have been working on this project for awhile . in 2008 had a lot of cracked housing .found out that the coils were wired wrong by the speed shop who did the wiring . so i decided to put way. till 2011 and went to work on it . came out this year . just made a few passes and were having a few problems one the truck once it left the line it would die after the 100 ft mark the truck would pick up and take off and still went 133 mph weighing 2580 lb only using 3 gears .all at 15 lbs of boost .
have been working with electromotive and ken sheepers.
we believe we found the issue and will be ready for next season
to make some serious runs
here is a pic
have been working with electromotive and ken sheepers.
we believe we found the issue and will be ready for next season
to make some serious runs
here is a pic
#2
Full Member
Thread Starter
Join Date: Oct 2008
Location: new jersey
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
another pic
engine 13b cosmo ported semi all done by me
goopy resurfaced rotor housing and i usde his apex seal
88 mm turbo
with lenco 4 speed and adjustable clutch
c/m back half truck
goopy resurfaced rotor housing and i usde his apex seal
88 mm turbo
with lenco 4 speed and adjustable clutch
c/m back half truck
#7
Full Member
Thread Starter
Join Date: Oct 2008
Location: new jersey
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
thanks its a tec3r
were running 8 injectors and mechancal fuel pump on methanol
were going to add 4 more injectors over the winter .
send the computer to electromotive to do the updates .
were running 8 injectors and mechancal fuel pump on methanol
were going to add 4 more injectors over the winter .
send the computer to electromotive to do the updates .
Trending Topics
#14
Full Member
Thread Starter
Join Date: Oct 2008
Location: new jersey
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
thanks ken sheepers isn't drag racing that I know of but he is real familiar with electromotive. mine is a s400 right now we are only turning it 9500 rpm until we get the bugs out if it runs the numbers at 9500 rpm we will leave we will keep some more updates after testing
#23
Full Member
Thread Starter
Join Date: Oct 2008
Location: new jersey
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
update we have tested and still working out some small gremlins best et so far at 15 lbs of boost weighing at 2600 went 10.21@141
go to you tube and look up jl racing test and tune for videos
go to you tube and look up jl racing test and tune for videos