And this is how the ROTARY was BANNED FROM NHRA.
There is also another major factor to the banning of the 4-rotor and that's because it's not a factory mass produce product.
lets get a couple of things straight,first of all,terry's RX-3 was not a 4 rotor,it was a dual points distributor 12a bridge,with a holley carb,doug nash 5 spd,and a dana 60 ,terry set the index at 11.38,i don't remeber what the mph was,it's common talk when i take my RX-3 to the track here in Portland,it's good to see this thread and give some recognition to terry,i will have to pass this on to him,and the rest of the old crew here.
lets get a couple of things straight,first of all,terry's RX-3 was not a 4 rotor,it was a dual points distributor 12a bridge,with a holley carb,doug nash 5 spd,and a dana 60 ,terry set the index at 11.38,i don't remeber what the mph was,it's common talk when i take my RX-3 to the track here in Portland,it's good to see this thread and give some recognition to terry,i will have to pass this on to him,and the rest of the old crew here.
Terry Hoards car did not have a four rotor engine. It was a twin dizzy 12-A. Which can be varified thru Billy Burnham, who was his mechanic and still races a RX-3 SP at Portland International Raceway and Woodburn. This only increases Terry's legend. Many of us here in Portland remember the Samauri Warrior, and actually started out as an R-100. Terry found the RX-3 to be more stable at higher speeds. I believe his best 1/4 mile was 11.36.
Terry's Samauri was not a 4 rotor
Viking, I'm not sure where you get your info on Terry's Samauri Warrior. His RX-3 was a 12-A Bridgeport, a Nash box with a Dana 60. Heck, it even had twin distributors. He is a local here in the Portland area, and this information is accurate. One of his mechanics at the time still runs RX-3's here and at the Woodburn facility. One thing you failed to mention is that the Samauri actually started as an R-100. But all of this leads us to one conclusion. It only makes the legend of the Samauri and Terry's driving skill even more respected.
Thread Starter
Joined: Jan 2007
Posts: 7,140
Likes: 0
From: Saint Louis / Illinois
Viking, I'm not sure where you get your info on Terry's Samauri Warrior. His RX-3 was a 12-A Bridgeport, a Nash box with a Dana 60. Heck, it even had twin distributors. He is a local here in the Portland area, and this information is accurate. One of his mechanics at the time still runs RX-3's here and at the Woodburn facility. One thing you failed to mention is that the Samauri actually started as an R-100. But all of this leads us to one conclusion. It only makes the legend of the Samauri and Terry's driving skill even more respected.
Bret Kepner from ESPN
lets get a couple of things straight,first of all,terry's RX-3 was not a 4 rotor,it was a dual points distributor 12a bridge,with a holley carb,doug nash 5 spd,and a dana 60 ,terry set the index at 11.38,i don't remeber what the mph was,it's common talk when i take my RX-3 to the track here in Portland,it's good to see this thread and give some recognition to terry,i will have to pass this on to him,and the rest of the old crew here.
here are a couple of pics of the newest Samurai Warrior,this is Bill Burnham's,terry's head mechanic back in the day,a friend and i just happened to stop by tonight,so i took these with my cellphone,best time to date is 10.09@124 on a mild tune,i asked him to email me some pics of terry's RX-3,so when i get them i will post them,enjoy
Last edited by 1BADSP; Jan 2, 2008 at 10:43 PM. Reason: pictures did not upload
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
Old School and Other Rotary
18
Jun 20, 2019 10:53 PM
Under PSI
3rd Generation Specific (1993-2002)
19
Sep 23, 2015 11:47 PM
datfast1
West RX-7 Forum
3
Sep 14, 2015 06:58 PM







