Passion4DRFT

I want to know if this wheel size will fit my 1990 fc3s without using a widebody or rolled fenders. Can anyone please help me?

EJayCe996

In the rear yes it will fit, in the front.. probably need someone else's opinion as I'm unsure of that but if it did you'd probably need to run a stretched tire.

Risky Devil

iTrader: (1)

Rears,will fit. you can prob. get away with a 255 with a mild pull

I'm running -2.5 camber in front, no pull just mild roll
with no liner and I don't rub with 225/40s with a 9'' +22.

Passion4DRFT

Than for the reply risky... What kind of coilovers are you running?

limbar85

iTrader: (21)

Im not sure what offsets you have to decide from. However, I've got CE28's 17x9 +22 w/ 255/40/17 on the front (well they are still sitting in my room to be put on) and from what ive seen, i may need to run a 5mm spacer depending on how the tires work out (some are wider than others). You will definately need to pull the fenders out or get some kind of wide fender or flare. Ive got corksports panspeed replicas and hopefully they work good.

Turbo23

iTrader: (4)

I assume you are talking on a FC. They will fit, but you need to either have a decent roll or go wide. You might also need a 5mm spacer to clear your suspension. Here is that fitment on my FC.

Passion4DRFT

Thanx for the info turbo23. What's the offset on your wheels?

Turbo23

iTrader: (4)

17x9 +22 front, 17x10 +18 rear

Passion4DRFT

What would be a good offset for my car excluding the wide body. Perhaps just fender rolls.

Turbo23

iTrader: (4)

you could get away with fender rolls on the rear, they would have to be rolled pretty good though. I think rolling in the front is just silly. Go with some sort of overfender or wide fender.

Natey

iTrader: (19)

17x8f and 17x9r Both +35 offset. The drop is from HKS coilovers.

Passion4DRFT

Turbo 23 where can i buy the overfenders you have on your FC?

Turbo23

iTrader: (4)

fronts from corksport, rears from raceonusa.com

Jaiyurai

iTrader: (30)

17x9 +22 17x10 +18

Passion4DRFT

I want to buy some enkei RPF1's SBC 17x9 +22 front, 17x10 +18 rear. Can anyone help me?

red_s5_fc3s

Contact Rishie from AutoRND. He is here on the forums, his sn is ARD T2. He might be having a sale going on still.

ARD T2

iTrader: (22)

Problem, they don't bring SBC in that size.

ususally it's like

17x9.5 +18 and 18x10.5 +15