Proper mix for water/alcohol injection?
#1
Senior Member
Thread Starter
Join Date: Mar 2001
Location: Seoul, Korea
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Proper mix for water/alcohol injection?
No, its not for my FD but I do have an extra one I may use.
I need to know how much alcohol and what type of alcohol to use... Jim Bean, Jack Daniels or will Soju work?
Cheuk
I need to know how much alcohol and what type of alcohol to use... Jim Bean, Jack Daniels or will Soju work?
Cheuk
#2
Hehe....
I prefer Soju myself!
I've actually heard of people running straight windshield washer fluid with supposedly no ill problems.
I plan on setting one up myself soon and will run about 30% denatured ethanol alcohol with 70% distilled water. I have heard that running a higher % alcohol mixture could ignite due to the flammability of the mixture. The 30/70 mixture is not flammable.
Any alcohol will do just be sure to run distilled water.
Let us know the results!
Rob
I've actually heard of people running straight windshield washer fluid with supposedly no ill problems.
I plan on setting one up myself soon and will run about 30% denatured ethanol alcohol with 70% distilled water. I have heard that running a higher % alcohol mixture could ignite due to the flammability of the mixture. The 30/70 mixture is not flammable.
Any alcohol will do just be sure to run distilled water.
Let us know the results!
Rob
#3
Oldie, but Goodie
iTrader: (3)
I will be running a rare combination:
mods: Hayes street port & polished stage II, 3mm seals,
T04e single turbo kit, Aquamist 2s water injection kit,
Pettit ss resonated mid-pipe, Pettit ss cat-back, Greddy SMIC,
RP Racing fuel pump, 1200cc injectors, Profec B, Centerforce clutch, under pulley kit(no air pump), Pettit short shifter kit, boost gauge, PFS PMC (10-psi, 15psi)
We will see in the next month if my configuration will prevail. We will see and I will post my results.
www.nopistons.com
mods: Hayes street port & polished stage II, 3mm seals,
T04e single turbo kit, Aquamist 2s water injection kit,
Pettit ss resonated mid-pipe, Pettit ss cat-back, Greddy SMIC,
RP Racing fuel pump, 1200cc injectors, Profec B, Centerforce clutch, under pulley kit(no air pump), Pettit short shifter kit, boost gauge, PFS PMC (10-psi, 15psi)
We will see in the next month if my configuration will prevail. We will see and I will post my results.
www.nopistons.com
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
NickNac113
1st Generation Specific (1979-1985)
13
10-01-15 09:25 PM