nos kit for first gen?
03-31-02, 09:07 AM
#2
I wish I was driving!
Not that I am aware off.
Carbed, I'm guessing?
But Holley's new top plate wet shot should work (new air cleaner lid, has an injkection system built in), as well as a custom direct-port nitrous injection system.
I could hook you up with a simple design for the last one, expect $500 cost on it.
Write back if you need more info on either.
Sean Cathcart
Carbed, I'm guessing?
But Holley's new top plate wet shot should work (new air cleaner lid, has an injkection system built in), as well as a custom direct-port nitrous injection system.
I could hook you up with a simple design for the last one, expect $500 cost on it.
Write back if you need more info on either.
Sean Cathcart
Last edited by scathcart; 03-31-02 at 09:09 AM.
04-02-02, 11:15 AM
#3
Punk Ass Bitch
Join Date: Dec 2003
Location: Welland, Ontario
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
I am also interested in this nitrous setup. I think I saw this on Carlos Gonzales's carburated 13b powered RX-3. However, his says K&N and had a wastegate attached because he has a turbo hooked up to it. This is a similar setup i want for my car...i think he's running alkyhol...not nitrous...but it reminds me of what you are saying.
Still, nitrous, good.
Still, nitrous, good.
04-03-02, 02:28 PM
#5
Passenger
Posts: n/a
NOS sportsman fogger kit 05030
i dunno about their tech department tho. i wrote them asking what parts i needed to convert a mustang EFI dry system to the above system mentioned. they said just buy the correct system. now wtf would i buy a new bottle, lines, etc? i just wanted a list of parts, those *********.
btw, you're gonna need a new fuel pump and run the fuel line to the N20 system before the regulator. the N20 system wants higher fuel pressure then the nikki...assuming that is what you have.
i dunno about their tech department tho. i wrote them asking what parts i needed to convert a mustang EFI dry system to the above system mentioned. they said just buy the correct system. now wtf would i buy a new bottle, lines, etc? i just wanted a list of parts, those *********.
btw, you're gonna need a new fuel pump and run the fuel line to the N20 system before the regulator. the N20 system wants higher fuel pressure then the nikki...assuming that is what you have.
04-04-02, 07:26 AM
#6
r71's daddy
Join Date: Feb 2001
Location: Atlanta, GA
Posts: 935
Likes: 0
Received 0 Likes
on
0 Posts
I managed to modify a NOS Sniper system to work on my GSL-SE. Cost a total of $260, including kit (all parts were new in box). Good for 100-150 shot. I use 100 shot. Wet.
04-04-02, 06:23 PM
#7
Punk Ass Bitch
Join Date: Dec 2003
Location: Welland, Ontario
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
That it carby-urated.
What I was saying.
Carlos Ganzales has a RX-3 Drag car with a carburated 13b-re. On top of the carburator is a chrome plated top that acts as an intake manifold that's attached to the turbo. The intake has a wastegate attached to it.
I believe this is kindof what the second person who posted is talking about. But the thing i was talking about is from K&N and there's no such thing on their site!
So, I'm lost.
What I was saying.
Carlos Ganzales has a RX-3 Drag car with a carburated 13b-re. On top of the carburator is a chrome plated top that acts as an intake manifold that's attached to the turbo. The intake has a wastegate attached to it.
I believe this is kindof what the second person who posted is talking about. But the thing i was talking about is from K&N and there's no such thing on their site!
So, I'm lost.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM