Intake Hardpipes
Thread Starter
Full Member
Joined: Feb 2001
Posts: 55
Likes: 0
From: Austin, Texas, USA!
Intake Hardpipes
What diameter are the hardpipes on used on the intakes? Also who makes them, and what are they made of, stainless or aluminum? Any installed pics would be appreciated especially close-ups on the front turbo.
Altitude SUCKS!!!
Joined: Jul 2001
Posts: 805
Likes: 0
From: Fort Collins, Colorado
HMMM...You could try using a tape measure.
But seriously, Most of them should be aluminum.
Check with Jason, he may be able to get you some.
M2 has them as well www.m2performance.com
But seriously, Most of them should be aluminum.
Check with Jason, he may be able to get you some.
M2 has them as well www.m2performance.com
Senior Member
Joined: Dec 2001
Posts: 691
Likes: 0
From: The Land Of No Pistons
HKS has come out with a new intake system for the FD. It is similar to the old system which consisted of twin Power Flow filters.
The new system called the "Racing Suction" is really really nice. It still consists of twin filters but now also replace the stock rubber hoses with poslished aluminum piping to both turbo intakes. The piping also have raised letters that say HKS RACING SUCTION. It is really cool and really expensive..i think like $600 now.
The new system called the "Racing Suction" is really really nice. It still consists of twin filters but now also replace the stock rubber hoses with poslished aluminum piping to both turbo intakes. The piping also have raised letters that say HKS RACING SUCTION. It is really cool and really expensive..i think like $600 now.
