So i have two motors they are both S4 turbo 2 motors. Out of the 2 motors i only have 2 good rotors and 1 good E-Shaft. One of the good rotors is not from the same motor with a good E-Shaft and rotor. So my question is can i just use the rotor with the other E-Shaft and rotor? Im guessing they need to be balanced but not 100% sure.

So yeah i have an ordeal on my hands.

 

Search for 'weight code rebuild'.

It returns http://www.rotaryresurrection.com/2n...nter_info.html

 

So from what there saying is i can mix s4 rotor from 2 engines to make one good one but that they need to be close to the same weight code.

 

Also to add on rotor is a B weight and the other is a D weight.

 

fixed

 

What is the damaged rotor weight of the rotating assembly you want to use? When replacing damaged rotors, the weight can only be no more than 1 weight division higher or lower than your damaged rotor. Example! If your damaged rotor is a "B" then you can install and "A" or a "C". Also since you have two engines apart, don't confuse the counterweights or flywheels and keep them with the same rotating assembly.