I am installing my Greddy 2 row FMIC for stock turbos and stock elbow the kit only came with 3 intercooler pipes labeled I-1 I-2 and I-3 this is all that is shown in the Japanese instructions also. BUT it won't fit. It looks like it is missing the final part that goes into the stock elbow. Has anyone else had this problem? Solution?
Thanks,
Shane

 

Shane,
Im getting in a few more of those intercoolers in the next day and will open one up to compare. If all else fails I will call Greddy, but they are usually clueless.

Jason
www.rx7store.net

 

You might be installing it wrong. The #s with the arrows shows you were they should be installed. For example, 1-->1, 1-->2, and 1-->3 tells you were the air flow passes. You want the arrow pointing towards the elbow and turbos, don't have them facing the other way. If you still have problems, I'll try to help you out again.

 

There should be 4 pipes. See pic below...hope it helps.

 

That pic is the front mount for the Greddy elbow. They also make one for the stock elbow.

Jason