Rotary Car Performance General Rotary Car and Engine modification discussions.

the fastest rx-7

Thread Tools
 
Search this Thread
 
Old Aug 24, 2004 | 01:03 PM
  #26  
87turbo2's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Apr 2002
Posts: 768
Likes: 0
From: Jacksonville, Florida
Originally Posted by gnx7
Cris "Speed" Anderson in FL has a 2nd gen with 13B-REW single turbo motor, Jericho 5speed I believe, Mopar 8 3/4" rear end and has gone 9.20's@150mph with 26x10.5" slick and turbo only was the story. Suppossedly weighed 2600lbs approx.

I haven't heard about the car in years.... wonder if it is still around or if he has gone faster. The car could technically be a street car.

I'd say he is one of the fastest on here.... excluding tube frame 20B monsters.

-GNX7
http://www.rx7city.com/featured_1.htm

all his stats and pics are there.
Old Aug 31, 2004 | 03:57 PM
  #27  
T88Rx7's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Feb 2002
Posts: 750
Likes: 0
From: Florida
If it is street Rx7 it would be Adam sarawatori or something like that, He ran a 8.8 or 8.9 back like 7 years ago or something
Old Aug 31, 2004 | 05:22 PM
  #28  
jimlab's Avatar
Super Snuggles
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 10,091
Likes: 34
From: Redmond, WA
Originally Posted by T88Rx7
If it is street Rx7 it would be Adam sarawatori or something like that, He ran a 8.8 or 8.9 back like 7 years ago or something
7 years ago, the quickest FD in the U.S. was probably Kevin Wyum's car @ 10.9x. FDs have only been running 8s and in the last 2-3 years, and those cars are considerably different from street cars.

Last edited by jimlab; Aug 31, 2004 at 05:24 PM.
Old Sep 3, 2004 | 01:00 AM
  #29  
flamin-roids's Avatar
Lets rock.
Tenured Member 10 Years
 
Joined: Apr 2004
Posts: 1,355
Likes: 0
From: SLC, Utah
A friend of mine has a FD that is basically a streetcar. Stock drivetrain and the only thing done to the interior is a roll cage. He runs 10.1@135mph. Still wieghs the factory wieght and puts down 730hp without nitrous.
Old Sep 3, 2004 | 01:09 AM
  #30  
jimlab's Avatar
Super Snuggles
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 10,091
Likes: 34
From: Redmond, WA
Originally Posted by flamin-roids
A friend of mine has a FD that is basically a streetcar. Stock drivetrain and the only thing done to the interior is a roll cage. He runs 10.1@135mph. Still weighs the factory weight and puts down 730hp without nitrous.
730 RWHP in a stock weight FD should be good for 145+ mph trap speeds. So how much power is he making again?
Old Sep 3, 2004 | 02:30 AM
  #31  
SPiN Racing's Avatar
Senior Member
Tenured Member 20 Years
 
Joined: Mar 2001
Posts: 482
Likes: 0
From: St. Pete, FL
My friends, cousins, uncles, girlfriends, boyfriends, sisters, mothers, husbands, sons, sister, babysitters, dog, has a friend, thats owners, sisters, 3rd cousin twice removed's best friend... Knows a guy....
Who has a 6 Rotor that has 2500 Hp and runs a 6 in the 1/4 at 225mph...
And YES... he shifts mad quick yo.
Brospeed Tip
APC lights
APC dash
APC shifter


Ok Im gonna retch if i keep this up..

On to more useful threads.... /sigh
Old Sep 3, 2004 | 04:39 AM
  #32  
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 302
Likes: 0
From: Vancouver, B.C.
Originally Posted by SPiN Racing
My friends, cousins, uncles, girlfriends, boyfriends, sisters, mothers, husbands, sons, sister, babysitters, dog, has a friend, thats owners, sisters, 3rd cousin twice removed's best friend... Knows a guy....
Who has a 6 Rotor that has 2500 Hp and runs a 6 in the 1/4 at 225mph...
And YES... he shifts mad quick yo.
Brospeed Tip
APC lights
APC dash
APC shifter


Ok Im gonna retch if i keep this up..

On to more useful threads.... /sigh
dont forget the mad TYTE chromed out spinner hubcaps and blowoff valve exhaust tip
Old Sep 3, 2004 | 02:26 PM
  #33  
Gargamel's Avatar
Banned. I got OWNED!!!
 
Joined: Dec 2003
Posts: 1,783
Likes: 0
From: The land of Lincoln
Originally Posted by jimlab
Eric Cheatham has the fastest RX-7 on the forum.
not actually..... still working out bugs like usuall. I only managed a 11.51 @123 two weeks ago. That's only with 389 to the tires ( nitto 555r's ). Maybe I'll go faster one day if I ever figure out how to make some real power.
Old Sep 3, 2004 | 02:29 PM
  #34  
Red-Rx7's Avatar
Administrative Me
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 1,370
Likes: 0
From: Kansas
Originally Posted by Gargamel
not actually..... still working out bugs like usuall. I only managed a 11.51 @123 two weeks ago. That's only with 389 to the tires ( nitto 555r's ). Maybe I'll go faster one day if I ever figure out how to make some real power.
Eric, you might try letting someone else build/tune it?
Old Sep 3, 2004 | 02:38 PM
  #35  
Gargamel's Avatar
Banned. I got OWNED!!!
 
Joined: Dec 2003
Posts: 1,783
Likes: 0
From: The land of Lincoln
Originally Posted by Red-Rx7
Eric, you might try letting someone else build/tune it?
I tried that the first time and it costed me tes of thousands of dollars. The car is built and ready to rock now. It's just a matter of working out the bugs. Nothing wrong with my tuner. Jeff48 is the best power fc tuner in the area.
Old Sep 3, 2004 | 10:14 PM
  #36  
SPOautos's Avatar
Hey, where did my $$$ go?
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 4,413
Likes: 0
From: Bimingham, AL
Originally Posted by jimlab
730 RWHP in a stock weight FD should be good for 145+ mph trap speeds. So how much power is he making again?
Well, he did say 730HP which would be about 620RW which would prob be about right for those traps

Stephen
Old Sep 3, 2004 | 10:20 PM
  #37  
flamin-roids's Avatar
Lets rock.
Tenured Member 10 Years
 
Joined: Apr 2004
Posts: 1,355
Likes: 0
From: SLC, Utah
Originally Posted by jimlab
730 RWHP in a stock weight FD should be good for 145+ mph trap speeds. So how much power is he making again?
He is making 730rwhp. He has trapped over 140mph but 10.1@135mph was his fastest time. I think something was wrong with ignition or something related that cut him off at 135mph. Because he ran like 2 other runs and ran 135mph even every time. His car can easily run 9's but the car isn't perfectly tuned yet.
Old Sep 3, 2004 | 10:31 PM
  #38  
jimlab's Avatar
Super Snuggles
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 10,091
Likes: 34
From: Redmond, WA
Originally Posted by SPOautos
Well, he did say 730HP which would be about 620RW which would prob be about right for those traps
Actually, he said the car puts down 730 horsepower. "Puts down" implies measurement at the rear wheels.

I'd like to hear more about the magical 9-second car still running the stock drivetrain. How many axles has he broken so far? What are his 60-foot times? What turbo is he using? Boost level?
Old Sep 8, 2004 | 12:27 PM
  #39  
flamin-roids's Avatar
Lets rock.
Tenured Member 10 Years
 
Joined: Apr 2004
Posts: 1,355
Likes: 0
From: SLC, Utah
Not 9 seconds. 10 seconds buddy. There's an article about it in RXtuner. Its an orange FD. He's running a T-88 if I remember correctly. I have no idea how many axles or trannies he goes through. Yet I've never seen him replace them.
Old Sep 8, 2004 | 01:33 PM
  #40  
jimlab's Avatar
Super Snuggles
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 10,091
Likes: 34
From: Redmond, WA
Originally Posted by flamin-roids
Not 9 seconds. 10 seconds buddy.
I'm not your buddy, pal, and 10.1 is close enough to the 9s for the purpose of this discussion.

There's an article about it in RXtuner.
Well that proves everything. I'm sure they verify each owner's claims by dyno'ing their car, just like the other magazines.

Its an orange FD. He's running a T-88 if I remember correctly.
On a 13B? 730 RWHP with a T-88??

I have no idea how many axles or trannies he goes through. Yet I've never seen him replace them.
If he's knocking on 9 seconds like you say he is, he's breaking parts. Everyone else running that fast does sooner or later.
Old Sep 8, 2004 | 03:08 PM
  #41  
SPiN Racing's Avatar
Senior Member
Tenured Member 20 Years
 
Joined: Mar 2001
Posts: 482
Likes: 0
From: St. Pete, FL
Originally Posted by jimlab
If he's knocking on 9 seconds like you say he is, he's breaking parts. Everyone else running that fast does sooner or later.
Even Mike Lowe in Sarasota with his Turbo 13B first gen was going through GSLSE rears like crazy, till he put a narrowed 9" ford in it. Yes it looks like a original rearend.. but it isnt. He also runs a powerglide.. and of course a different driveshaft. Looks like a stock 1st gen.. REALLY not. And IIRC it runs 9s.
Old Sep 8, 2004 | 03:14 PM
  #42  
matty's Avatar
Lives on the Forum
Tenured Member: 25 Years
Liked
Loved
 
Joined: Mar 2001
Posts: 5,014
Likes: 40
From: CT
more of the same!
Old Sep 8, 2004 | 06:18 PM
  #43  
flamin-roids's Avatar
Lets rock.
Tenured Member 10 Years
 
Joined: Apr 2004
Posts: 1,355
Likes: 0
From: SLC, Utah
Don't believe it do ya. I've seen the car and seen the slips. There's nothing really special about his car either. The interior is stock with the addition of a roll cage. Wieghs the factory wieght even. I don't know if his gears are modified that could be a possibility. He builds awesome motors thats for sure. And I always thought the FD had a stronger rear than a GSL-SE. I'm not going to argue this anymore because its not my car we're talking about. And I don't think he would be to happy about a bunch of net nerds calling B.S. on his car. I didn't build the car. I just know what I've seen and heard about it.
Old Sep 8, 2004 | 07:14 PM
  #44  
jimlab's Avatar
Super Snuggles
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 10,091
Likes: 34
From: Redmond, WA
Originally Posted by flamin-roids
And I don't think he would be to happy about a bunch of net nerds calling B.S. on his car.
You'll have to excuse me for not giving a damn what he thinks about it.
Old Sep 8, 2004 | 07:35 PM
  #45  
RotaryWeaponSE7EN's Avatar
Rotary Freak
Tenured Member 20 Years
iTrader: (6)
 
Joined: Dec 2001
Posts: 2,937
Likes: 3
From: Mission,KS
Originally Posted by sillbeer
Really?!?! I bet nobody had a video camera right? Alf???? Show us the track slip?

-Destin

Actually Sill there was a video of it. I think its on the Velocity Is Faster site.

And the fastest 7, not on the forum, unless he is, is Albel 7 that ran like 6.89.
Old Sep 8, 2004 | 07:46 PM
  #46  
jimlab's Avatar
Super Snuggles
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 10,091
Likes: 34
From: Redmond, WA
Originally Posted by RotaryWeaponSE7EN
ran like 6.89.
In something that was shaped like an RX-7, but wasn't.
Old Sep 8, 2004 | 09:20 PM
  #47  
RotaryWeaponSE7EN's Avatar
Rotary Freak
Tenured Member 20 Years
iTrader: (6)
 
Joined: Dec 2001
Posts: 2,937
Likes: 3
From: Mission,KS
It was shaped like an Rx-7, but had a 3-rotor in it.
Old Sep 8, 2004 | 09:45 PM
  #48  
ErnieT's Avatar
Living life 9 seconds at a time
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Demetrios K of Reactive Racing is on here. His fastest et to date is a 8.49@164mph.
He's also made the most power than anyone on this fourm. 832rwhp through an automatic on a 2rotor, all turbo, street port w/ stock 2mm apex seals.
Old Sep 8, 2004 | 09:54 PM
  #49  
SPiN Racing's Avatar
Senior Member
Tenured Member 20 Years
 
Joined: Mar 2001
Posts: 482
Likes: 0
From: St. Pete, FL
Originally Posted by flamin-roids
I just know what I've seen and heard about it.

That says it all...
Old Sep 9, 2004 | 12:23 AM
  #50  
jimlab's Avatar
Super Snuggles
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 10,091
Likes: 34
From: Redmond, WA
Originally Posted by RotaryWeaponSE7EN
It was shaped like an Rx-7, but had a 3-rotor in it.
It was shaped like an RX-7 but had a funny car-style body a full tube frame chassis, and a domestic 4-link suspension, rear end, and transmission. Oh yeah, and a 20B. Must be an RX-7.



All times are GMT -5. The time now is 04:28 AM.