Rotary Car Performance General Rotary Car and Engine modification discussions.

Detenation/Good intake temp?

Thread Tools
 
Search this Thread
 
Old Mar 22, 2003 | 08:08 PM
  #1  
93rotorhead's Avatar
Thread Starter
Senior Member
Tenured Member 15 Years
 
Joined: Jan 2003
Posts: 308
Likes: 0
From: SC
Detenation/Good intake temp?

Ok guys, someone please explain detenation to me? also intake temp? how hot can it get before the damage is done?
Thanks Channon
Reply
Old Mar 29, 2003 | 08:39 PM
  #2  
bcty's Avatar
Boost This!
Tenured Member 20 Years
 
Joined: Nov 2001
Posts: 1,935
Likes: 0
From: Nanaimo, B.C, Canada
i would not get too conserned with your intake temps as much as your exhaust temps.. if they are really really hot then your gonna be running really lean and that bads.. more fuel = cooler temps.. I dont see how intake temps could get high enough with an intercooler to damage the engine unless your running lots of psi though yoiur stock system.. detonation is under lean conditions.. keep it stoich and you should be fine
Reply
Old Mar 30, 2003 | 07:05 AM
  #3  
ErnieT's Avatar
Living life 9 seconds at a time
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
post in the right section, please...
Reply




All times are GMT -5. The time now is 09:53 AM.