Alcohol Injection
#1
Full Member
Thread Starter
Join Date: Aug 2002
Location: Columbus, OH
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Alcohol Injection
A had a few questions about alcohol injection in rotaries. Most specifically TurboII's.
I have a working S4 TII that's been wrecked (still runs fine) that we were wanting to experiment on. One of the things we wanted to try is alcohol injection. I was curious if anybody here has done it to their RX7 and what their setup was. I also wanted to know what mods you have and how much power you netted from the alcohol setup.
I have a working S4 TII that's been wrecked (still runs fine) that we were wanting to experiment on. One of the things we wanted to try is alcohol injection. I was curious if anybody here has done it to their RX7 and what their setup was. I also wanted to know what mods you have and how much power you netted from the alcohol setup.
#3
Full Member
Thread Starter
Join Date: Aug 2002
Location: Columbus, OH
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Rotortuner
There are quite a few guys on here that are running the ethenol. Its called E85. its basically denatured alcohol. Is this what your talking about?
CJG
There are quite a few guys on here that are running the ethenol. Its called E85. its basically denatured alcohol. Is this what your talking about?
CJG
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM