79 SA transmission using FC N/A lightweight flywheel?
#1
Likes to swear....alot
Thread Starter
iTrader: (3)
Join Date: Dec 2002
Location: Kitchener Ontario Canada
Posts: 3,791
Likes: 0
Received 3 Likes
on
3 Posts
79 SA transmission using FC N/A lightweight flywheel?
I'm fairly confident that any N/A lightweight flywheel will fit the SA bellhousing but I just want to double check.
Anyone here used an FC lightweight flkywheel and clutch kit in a 5spd 1979 SA trans?
Thanks
Anyone here used an FC lightweight flkywheel and clutch kit in a 5spd 1979 SA trans?
Thanks
#2
talking head
as long as the flywheel is a 9.0 ( s4/5 NA ) or 8.5 inch type
( and not a turbo 9.5 )
it will fit and work in all the earlier "M" style gearboxes with the original starter
'M" types in 1983-85 ( and FC NA ones ) are all built to use a 9.0 inch type clutch package,, previous from 1979-1983 used the 8.5
as such the 9.0 ring gear is exactly the same as that added to 8.5 inch ones
( and both 8.5 and 9.0 use the 22 spline centre of the up to and including FC "M" box input shaft )
short answer = AOK
( and not a turbo 9.5 )
it will fit and work in all the earlier "M" style gearboxes with the original starter
'M" types in 1983-85 ( and FC NA ones ) are all built to use a 9.0 inch type clutch package,, previous from 1979-1983 used the 8.5
as such the 9.0 ring gear is exactly the same as that added to 8.5 inch ones
( and both 8.5 and 9.0 use the 22 spline centre of the up to and including FC "M" box input shaft )
short answer = AOK
#3
Likes to swear....alot
Thread Starter
iTrader: (3)
Join Date: Dec 2002
Location: Kitchener Ontario Canada
Posts: 3,791
Likes: 0
Received 3 Likes
on
3 Posts
Cool, thanks
I'm swapping a stock S5 turbo engine into a 79 using the stock trans. So now I just need to find an FC lightweight flywheel and clutch kit.
I'm swapping a stock S5 turbo engine into a 79 using the stock trans. So now I just need to find an FC lightweight flywheel and clutch kit.
Thread
Thread Starter
Forum
Replies
Last Post