3rd gen tranny on a 2nd gen
11-16-01, 01:01 AM
#1
3rd gen tranny on a 2nd gen
Can I put a 3rd gen tranny on a second generation? I have a 1988 n/a and I keep running through transmissions. this is the 3rd time since I started my mods. I thought about a TII tranny but I want more. will it work? I know I will have to buy a flywheel and clutch kit
11-16-01, 02:25 AM
#2
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
the only "more" you get from a 3rd gen trans is more headache because the clutch is the opposite from the normal T2 type clutch action.
The Series 5 (88-91) T2's have the same cogs as the 3rd gens do, in other words they can both handle the same amount of power and stress, so put a series 5 T2 box into your car and quite trying to be difficult.
The Series 5 (88-91) T2's have the same cogs as the 3rd gens do, in other words they can both handle the same amount of power and stress, so put a series 5 T2 box into your car and quite trying to be difficult.
11-16-01, 12:59 PM
#3
I am not trying to be difficult, I am only trying to set up my car to be reliable. It is a pain in the but to change a tranny, I don't want to do it again after this.
Thanks for your help though. I had considered the series 5 first but thought that the 3rd might be stronger
Thanks for your help though. I had considered the series 5 first but thought that the 3rd might be stronger
Thread
Thread Starter
Forum
Replies
Last Post