3rd Gen 13BTT into 2nd Gen

Reply Subscribe

Thread Tools

Search this Thread

Apr 9, 2007 | 04:59 PM

shea88

Thread Starter

Junior Member

Joined: Apr 2007

Posts: 18

Likes: 0

From: Illinois

3rd Gen 13BTT into 2nd Gen

I think I decided to swap in the 13BTT from the 3rd Gen into my 88, I know that the tranny bolts up but do they use the same mounts and what else would be involved?

Apr 9, 2007 | 05:39 PM

dregg100

Junior Member

iTrader: (34)

Joined: Nov 2004

Posts: 14

Likes: 0

From: AZ

search, and your better off to swap a 13b-RE in there, a little easier.

Apr 9, 2007 | 06:24 PM

felix_is_alive

Rotary Enthusiast

Joined: Jan 2003

Posts: 1,349

Likes: 2

From: planet earth

13bTT mounts are in rear plate , FC`s use center plate mounted motor mounts , best bet is to rebuild engine using fc center plate , ......or better yet , as stated above , get 13B-RE

Apr 9, 2007 | 07:00 PM

slo

registered user

iTrader: (1)

Joined: Jan 2006

Posts: 2,469

Likes: 0

From: San Diego

there are actually bolt on mounts for rew to FC, another option better than using an FC int plate is to drill out the int plate on the REW, pineaple racing has stated that they can do this for around 500 dollars