13bt-13b-rew Swap.
Thread Starter
Rotary Enthusiast
Joined: Dec 2001
Posts: 1,271
Likes: 0
From: UK
13bt-13b-rew Swap.
Hi all. I am just inquiring how hard it would be to Transplant a 13b-rew engine from a Gen 3 to my Turbo 2?
I would have a Haltech E6K. what elkse would i need?
Has anyone done it? its just a pal says i will always get more power from a rew engine. So i can get them cheep enough so if it is'nt hard i might buy another engine and mod then i can run the one i have.
I would have a Haltech E6K. what elkse would i need?
Has anyone done it? its just a pal says i will always get more power from a rew engine. So i can get them cheep enough so if it is'nt hard i might buy another engine and mod then i can run the one i have.
'Tuna'
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Re: 13bt-13b-rew Swap.
Originally posted by Grizzly
Hi all. I am just inquiring how hard it would be to Transplant a 13b-rew engine from a Gen 3 to my Turbo 2?
I would have a Haltech E6K. what elkse would i need?
Has anyone done it? its just a pal says i will always get more power from a rew engine. So i can get them cheep enough so if it is'nt hard i might buy another engine and mod then i can run the one i have.
Hi all. I am just inquiring how hard it would be to Transplant a 13b-rew engine from a Gen 3 to my Turbo 2?
I would have a Haltech E6K. what elkse would i need?
Has anyone done it? its just a pal says i will always get more power from a rew engine. So i can get them cheep enough so if it is'nt hard i might buy another engine and mod then i can run the one i have.
crispeed
87TII
9.20@150mph
Full Member
Joined: Dec 2001
Posts: 103
Likes: 0
From: uk
More power? Well thats a bit of a strange question, I think u mean like for like setups! i.e One 13b running the same single turbo setup has the 13 rew. Same boost level and porting!
The 13 rew will give u more power!
Smile u can change it! but why? increase your boost!
The 13 rew will give u more power!
Smile u can change it! but why? increase your boost!
'Tuna'
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Originally posted by mr rx
More power? Well thats a bit of a strange question, I think u mean like for like setups! i.e One 13b running the same single turbo setup has the 13 rew. Same boost level and porting!
The 13 rew will give u more power!
Smile u can change it! but why? increase your boost!
More power? Well thats a bit of a strange question, I think u mean like for like setups! i.e One 13b running the same single turbo setup has the 13 rew. Same boost level and porting!
The 13 rew will give u more power!
Smile u can change it! but why? increase your boost!
That's what I've experienced!
crispeed
87TII
9.20@150mph
Rotary Enthusiast
Joined: Feb 2001
Posts: 898
Likes: 0
From: Right Here!
I have stomped the crap out of REW's with my little old TII!
If you put a single turbo on them and port them, they basically ARE the same engine.
I would like series 4 rotors with series 5 housings with series 6 intake.
Isn't that what you are running Crispeed?
If you put a single turbo on them and port them, they basically ARE the same engine.
I would like series 4 rotors with series 5 housings with series 6 intake.
Isn't that what you are running Crispeed?
'Tuna'
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Originally posted by RXTASY1
I have stomped the crap out of REW's with my little old TII!
If you put a single turbo on them and port them, they basically ARE the same engine.
I would like series 4 rotors with series 5 housings with series 6 intake.
Isn't that what you are running Crispeed?
I have stomped the crap out of REW's with my little old TII!
If you put a single turbo on them and port them, they basically ARE the same engine.
I would like series 4 rotors with series 5 housings with series 6 intake.
Isn't that what you are running Crispeed?
Front and rear plates(housings) are fd's. Middle is 20B. Rotors and housings are FD's.
Intake from 13B-RE. FD Throttle body.
crispeed
Thread
Thread Starter
Forum
Replies
Last Post
