turbo'd probe with ze motor.
#1
Rotary Enthusiast
Thread Starter
iTrader: (5)
Join Date: Apr 2006
Location: pennsylvania
Posts: 1,488
Likes: 0
Received 0 Likes
on
0 Posts
turbo'd probe with ze motor.
so my friend thinks he has the fastest car around. Its a ford probe with a mazda "ze" (i think) motor. he has mega squirt intake exhaust and a custom turbo kit. He was running 9-10 psi. I heard him telling everyone he would destroy my 7..so i was like ok....find the spot where he and his friends are hanging out at..i pull up and never even got out of the car when everyone comes to me and starts telling me how he will beat me.....so i look at him and tell him "lets go" we go out to the highway and do a 40 roll. we were about even till 80-90 where i had him by about a car and a half untill we shut down at 140-150. did it about 3 times to to check he was def impressed with the 7.
i was spiking 14 psi and holding 12...wish i could figure out how to spike and hold 14psi....
i was spiking 14 psi and holding 12...wish i could figure out how to spike and hold 14psi....
#6
Rotary Enthusiast
Thread Starter
iTrader: (5)
Join Date: Apr 2006
Location: pennsylvania
Posts: 1,488
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Authentikdit
Very nice kill..What horsepower are you seeing at 12 psi?
hks intake,
full 3" exhaust, no cat racing beat single cat back
greddy fmic
99 twins
high 10-low 11 afr
supra tt pump
additional 750 cc injectors (2)
greddy profec 2 spec b boost controller.
koyo rad.
Trending Topics
#8
Rotary Enthusiast
Thread Starter
iTrader: (5)
Join Date: Apr 2006
Location: pennsylvania
Posts: 1,488
Likes: 0
Received 0 Likes
on
0 Posts
stock ecu, with a hks fuel cut defender.....i also am running a additional injector controller (called split second) that controls the additional 2 750cc injectors I have. It monitors boost pressure and as the boost raises above 8psi it activates the additional injectors to pulse enough fuel for my desired boost level...
#9
silver ghost
iTrader: (11)
Join Date: Sep 2003
Location: Home of the Rolex 24
Posts: 3,061
Likes: 0
Received 5 Likes
on
5 Posts
Originally Posted by AWD-RWD racer
stock ecu, with a hks fuel cut defender.....i also am running a additional injector controller (called split second) that controls the additional 2 750cc injectors I have. It monitors boost pressure and as the boost raises above 8psi it activates the additional injectors to pulse enough fuel for my desired boost level...
#10
Top's always down
iTrader: (5)
Originally Posted by cool_as_crap
was his name Brian?
turbo ZE is a nice motor. He ran out of gear at 140, though. I'm surprised you took him above 90mph. At that point, he'd have much lower gearing than you, and a similar redline(7k vs 7500).
Nice kill. Tell him to get a CZT tranny, CZT valve train and up the boost to 16 PSI then run you again. That's assuming he has a decent sized turbo.
#11
Senior Member
Join Date: Oct 2005
Location: charlotte, nc
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
Ha ha, turbo probe.. that brings back memories. i had one but it was a built kl-03 motor. the KL-ze is too high compression to run much boost. When it was my car, i first ran N20. killed the auto tranny, swapped out to a 5 speed. a year after that the rings gave way. SDO we had it built to 9:1 compression, still stock heads with arp studs and MLS head gasket. Then we supercharged it with a vortech blower, didnt make much power and didnt build boost until 6000rpms! lol. So we built a turbo kit using a t3/t4 and it mounted above the front bank manifold. i gave it to my brother just before turbocharging it, so its his at this point, but built by me. We made about 265 whp at 8psi. not too bad, but we never put larger injectors in to run more boost. we sold it a eyar ago to some high school kid. its not a bad car, but nowhere near my FD.
#12
Rotary Enthusiast
Thread Starter
iTrader: (5)
Join Date: Apr 2006
Location: pennsylvania
Posts: 1,488
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by G's 3rd Gen
320-330 sounds right. Why not have a stand alone and tune? Car would be much better off. Probably drive better. Turn the boost to 15 w/ proper fuel set up. I used to run 12 psi w/ a pettit unlimited. Now at 15 to 16 w/ microtech. The car is a totally different animal . G
i used to have a pfc...but no one around me said they could tune it....and we tried for a while to have steve come down, but that never happened. With the AIC i have a friend that can tune that all day long. so i may be sacrificing 10-20 hp. but i can tune it when ever i want and for a fraction of the cost.
#13
Rotary Enthusiast
Thread Starter
iTrader: (5)
Join Date: Apr 2006
Location: pennsylvania
Posts: 1,488
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 93VRTouring
**** off
turbo ZE is a nice motor. He ran out of gear at 140, though. I'm surprised you took him above 90mph. At that point, he'd have much lower gearing than you, and a similar redline(7k vs 7500).
Nice kill. Tell him to get a CZT tranny, CZT valve train and up the boost to 16 PSI then run you again. That's assuming he has a decent sized turbo.
turbo ZE is a nice motor. He ran out of gear at 140, though. I'm surprised you took him above 90mph. At that point, he'd have much lower gearing than you, and a similar redline(7k vs 7500).
Nice kill. Tell him to get a CZT tranny, CZT valve train and up the boost to 16 PSI then run you again. That's assuming he has a decent sized turbo.
#14
I can has a Hemi? Yes...
iTrader: (2)
I think I remember ths probe when it was N/A and the megasquirt. They were at the dyno one day right before I dynoed my car. They dynoe'd like 180 to the wheels. The two guys then told me to get rid of my "crappy" Haltech and put on a megasquirt. Then on my first untuned pass with My Haltech my car did 336 at 9 psi. They promptly got in their car and left. LOL
#16
Top's always down
iTrader: (5)
Originally Posted by AWD-RWD racer
actually after 90 is when i started to really pull on him. he comes into boost much faster than i do.
One time I raced an FD in the PGT. My GF at the time was driving, it was late, dark and I didn't know wtf an RX-7 was. So my gf is riding his *** in my completely stock PGT. They go, and by the end of first, he was maybe 2 cars ahead, she missed second and by the time she got it in to gear, his tail lights were gone
But ya, maybe you shouldn't tell him to get the CZT parts...if he doesn't know about/aquire them, he won't be able to tune his car above 300ish whp, at which point, you can keep slapping him around with impunity.
Thread
Thread Starter
Forum
Replies
Last Post