O 16581 72452 5

I spent another day on my car to try to fix the oil leaks and failed yet again, but i took it for a drive anyway to see how it drove. I had a friend follow me in my Cadillac ('98 Deville D'elegance), 15.3 quarter mile, 6.8 0-60.

We decide to race from a light as he films, i lauched late because i was making sure he was recording, i start pulling when i see cop lights in my rear view. I had no idea he was sitting at the light behind me of course. He came up to my car and said "What the **** was that!?", i explained to him why i was running it like that "I just turbocharged my engine and finished building it, i was trying to see what it'd do, i figured 2am on an empty highway was safe." "Why'd you turbocharge it?" "I'm planning Autocrossing it this summer" "The way you drive, i don't think you should be souping up a car", he handed me an unsafe start ticket.

This is with half of an exhaust with a y-pipe for a cut out after the turbo, when i open the exhaust, it's quite a bit quicker, i guess i'm getting alot of turbulance in that blocked Y pipe. This is 7-8psi on compression lowered 7 points and untuned (air/fuel fluctuating between high 10 and high 12s), i'm mildly satisfied, hopefully 20psi with better charge pipes and a not crappy intercooler will satisfy me.

Click here to watch 20050715_030953

TurboSE

Nice ! so what do U have in there? rods/pistons? Turbo?
My old car 95EX i had a stock b20b w/ a t3/t4 went KABOOOM!@ 8PSI=( it was fast tho!.................. My friends 95 coupe is pushing 480HP @25 psi fully built/ RAM style Turbo manifold/ T66/ 60? something like that! MoteC ECU full tein suspenssion/ Blah blah bla ....Runs low 11's (no roll cage)daily driver LOL!!!
That **** is INSANE!!!I saw him smoking a ferrari on the freeway on a 70MPH roll

O 16581 72452 5

D16z6, Rods are Eagle, pistons are Y.C.P. cast, i didn't have enough for forged, these were $125 shipped with Hasting rings, there's a few people pushing over 300hp on them, but i've yet to hear of anyone push them past their limit. Turbo is a T3 Super 60.

B20 is a bad block for making power, it's a bored B18, the sleeves are very thin because of this.

My bumper is falling off in the video, i lost the mounting hardware on the sides when i was doing a little rust repair.

TurboSE

yep ! B20 doent hold boost well
Learned it the hard way=( thin sleeves.........It was hella fun tho! Crazy *** Torque! hmmmmm I miss TEH TORQUE! damn U!!!!
That's it i'm not reading this thread anymore