wouter's forcefedracing car almost done
#1
Senior Member
Thread Starter
wouter's forcefedracing car almost done
http://http://s558.photobucket.com/a...acingdriver22/
After hitting someone's oil at the ccgp race in august we have been busy rebuilding the 20b fd rx7 roadrace car . After 9 months of hard work here is whats new for 2011.
fresh c series 20b
with ceramic seals
rewired entire car with racing harness
new gt42 billet turbo
new abs
new dash panel/ switches
carbon fiber dash
new rear flares
new michelin slicks
new front body work
new nascar rad, spal fan
new cobra diff with torsen and 3.73
new carch can
new axles
new gauges
new splitter
new big brake ducts
new hoses
new heat wrap
and more.
The car should be lighter and more powerfull. We hope to make it to rose cup in june 2011
wb
After hitting someone's oil at the ccgp race in august we have been busy rebuilding the 20b fd rx7 roadrace car . After 9 months of hard work here is whats new for 2011.
fresh c series 20b
with ceramic seals
rewired entire car with racing harness
new gt42 billet turbo
new abs
new dash panel/ switches
carbon fiber dash
new rear flares
new michelin slicks
new front body work
new nascar rad, spal fan
new cobra diff with torsen and 3.73
new carch can
new axles
new gauges
new splitter
new big brake ducts
new hoses
new heat wrap
and more.
The car should be lighter and more powerfull. We hope to make it to rose cup in june 2011
wb
Trending Topics
#9
Senior Member
Thread Starter
Here is a pic of the carbon fiber dash and center switch panel. The microtech and boost controller are now within reach with the belts on. Also note the wide trans tunnel to clear the jerico race tranny and the relocated ABS by the front passenger area.
[IMG][/IMG]
[IMG][/IMG]
#10
Senior Member
Join Date: Jul 2003
Location: Edmonton, AB, Canada
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Nice.
Those rear flares are over the top.
I also cut my car off at the struts and reworked the front end. Http://www.rxracing.com
You coming to Indy for the 1km rear straight? Conroy is sponsored as a drifter this year, so he won't be there.
-Trent
Those rear flares are over the top.
I also cut my car off at the struts and reworked the front end. Http://www.rxracing.com
You coming to Indy for the 1km rear straight? Conroy is sponsored as a drifter this year, so he won't be there.
-Trent
#22
Senior Member
Thread Starter
With 100 litres on board and no driver it still weighs 2777 lbs. A tank weighs about 190 lbs so the dry weight is about 2587. The next step is a tube frame chassis but that will be in a few years. I went with the s2000 abs until i can justify the bosch system.
The front tire is a 330 (12.5 inch) , rear 370 (14.5 inch). Mazda ran this width in their gto imsa car, and the imsa nissan zx ran a similar size .
The front tire is a 330 (12.5 inch) , rear 370 (14.5 inch). Mazda ran this width in their gto imsa car, and the imsa nissan zx ran a similar size .
Thread
Thread Starter
Forum
Replies
Last Post
4sfeedit
Canadian Forum
1
09-07-15 10:55 AM
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
4sfeedit
3rd Generation Specific (1993-2002)
10
08-16-15 01:42 PM
4sfeedit
Race Car Tech
0
08-11-15 04:11 PM