Welding FC Pinion Gear
#1
Welding FC Pinion Gear
Ok, who still does this? I know speedsource did at one time but im not sure they do anything with RX-7s anymore. Also ISC did at one time...waiting for an email back form Mike.
I want a shop that has done a few, and figured out the right welding rod, heat/cryo treating, etc to make them last....
I bought a few sets of 4.78 gears out of some Junk-yard Kias. Thinking some other folks might want to get in on a group cost for the machine work, or just sell them to guys with other cars...
My understanding is these will bolt into S2000s, Miatas, and 1st gens? Is that true?
I want a shop that has done a few, and figured out the right welding rod, heat/cryo treating, etc to make them last....
I bought a few sets of 4.78 gears out of some Junk-yard Kias. Thinking some other folks might want to get in on a group cost for the machine work, or just sell them to guys with other cars...
My understanding is these will bolt into S2000s, Miatas, and 1st gens? Is that true?
#4
SCCAEP
iTrader: (3)
Join Date: Dec 2006
Location: Dallas
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
Someone on this forum had a 4.78 done at http://www.rebelloracing.com/, he'll probably chime in soon.
There is a guy involved with Speedsource who is still doing them, but you won't find him here and he wouldn't want me posting his name. PM me and I will point you in the direction where to find him.
There is a guy involved with Speedsource who is still doing them, but you won't find him here and he wouldn't want me posting his name. PM me and I will point you in the direction where to find him.
#5
Mr. September FB 2011
iTrader: (9)
Join Date: Mar 2009
Location: Winnipeg, Manitoba
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
You can also use the miata Torsen diff in the big bearing first gen. The Kia front third member is a direct swap for first gen big bearing diff.
97+ Kia sportage 4x4
Last edited by nofords; 10-16-11 at 09:42 AM. Reason: Damn you auto correct!
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM