Watt to do about the Watts link ????
#1
Senior Member
Thread Starter
Join Date: May 2002
Location: Evansville, IN
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
Not sure what happened to the first post
I am getting ready to start trnasfering brackets from a stock rearend to an ford 8.8" to go under my 84 rx7. The car will be 90% drag raced and 10% autocrossed. Motor is making around 350hp at the wheels.
Should I ditch the watts link for a simple panhard rod?
Also I plan on lowering the car slightly. If I do stick with the watts link should I weld the mount higher up on the diff for the amount I lower the car?
Any input would be appreciated.
Later
Randy
I am getting ready to start trnasfering brackets from a stock rearend to an ford 8.8" to go under my 84 rx7. The car will be 90% drag raced and 10% autocrossed. Motor is making around 350hp at the wheels.
Should I ditch the watts link for a simple panhard rod?
Also I plan on lowering the car slightly. If I do stick with the watts link should I weld the mount higher up on the diff for the amount I lower the car?
Any input would be appreciated.
Later
Randy
Thread
Thread Starter
Forum
Replies
Last Post
edgars95rx7
Link Vi-PEC
0
10-01-15 01:59 PM
Adaptronic MTX-L to adaptronic question
TeamRuffRacing
Adaptronic Engine Mgmt - AUS
1
09-30-15 08:13 PM
pfsantos
2nd Generation Specific (1986-1992)
1
09-30-15 01:29 PM