turbo rx7 almost done check it out!!!!!
#6
Senior Member
Thread Starter
that motor is a 350 chevy with hilborn injection on alcohol the rad lay under the turbo at an angle with a 3000cfm fan and a ALUM scope
http://www.angelfire.com/extreme4/rt.../waste_038.jpg
http://www.angelfire.com/extreme4/rt.../waste_038.jpg
Last edited by yallgotboost; 08-16-03 at 11:27 PM.
Trending Topics
#14
Rotary Freak
iTrader: (10)
yallgotboost-
........that should be a pretty sick creation when it is finished. What is the projected weight for it when completed?
Are those s/s or mild steel headers? Also what do you plan to run as far as a transmission and what rear out back and style suspension?
Do you propose to keep it all under the hood? Would make for one hell of a sleeper. Make sure you either get the headers high temp coated or at the least wrap them in header wrap (may cause metal fatigue and cracking). The underhood heat in the FC engine bay with any turbocharged motor can get excessive and will affect the cooling system.
Pay us a visit at the V8RX7 forum:
http://www.torquecentral.com/forumdi...?s=&forumid=11
Later,
GNX7
........that should be a pretty sick creation when it is finished. What is the projected weight for it when completed?
Are those s/s or mild steel headers? Also what do you plan to run as far as a transmission and what rear out back and style suspension?
Do you propose to keep it all under the hood? Would make for one hell of a sleeper. Make sure you either get the headers high temp coated or at the least wrap them in header wrap (may cause metal fatigue and cracking). The underhood heat in the FC engine bay with any turbocharged motor can get excessive and will affect the cooling system.
Pay us a visit at the V8RX7 forum:
http://www.torquecentral.com/forumdi...?s=&forumid=11
Later,
GNX7
#17
Senior Member
Thread Starter
the headers are mild steel i plane to get them jet hot coated as for the rear its gettin a ford 9" with a 4 link setup every part onb the car i have made been alot of work should run good
#19
Senior Member
Thread Starter
#24
S4 now S6 soon...
Join Date: Sep 2003
Location: Bonney lake, WA
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
I'm a rotary purist that doesn't even own a rotary. I'd like to see what that kind of money invested in a 20B setup would do
BUT! I have a lot of respect for someone who can do that kind of work! Looks good man! Good luck at the track.
BUT! I have a lot of respect for someone who can do that kind of work! Looks good man! Good luck at the track.