SCCA Feul Test Port
#1
Newbie
Thread Starter
Join Date: Nov 2003
Location: Redding, CT
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
SCCA Feul Test Port
New to RX-7s, please excuse the lack of knowledge. Can anyone tell me who sells SCCA Fuel Test Port kits for a 13B RX7 (with Bosch L Jetronic FI).
Thanks,
Thanks,
#2
Rotary Enthusiast
Join Date: Apr 2001
Location: North Hollywood, Ca USA
Posts: 1,289
Likes: 0
Received 0 Likes
on
0 Posts
no such kit I have seen. all you need is a tee and a couple AN fittings. can be as simple as hose clamps, but would be cleaner if it was all in braided line and AN fittings. you could go to your local auto parts store to find the tee and fittings you would need
#3
Rotary Enthusiast
Join Date: Nov 2002
Location: Eastern PA
Posts: 1,014
Likes: 0
Received 0 Likes
on
0 Posts
we used a fitting from a boat store. Boaters use them to disconnect and connect portable gas tanks easily. This car is carbed of course, but we just cut out a place in the fuel line before the carb. Whenever we wanna get sample fuel, or drain some, we just snap on the fitting.
#5
Airflow is my life
Pffft, Pegasus, the boutique for the rich racer. Easy solution, get an A/C service valve with a pipe thread end 1/4", the a 1/4" tee and rig it up. Then use an A/C service hose to get your sample, nice and neat, no mess of fuel, and you can add a cap on the end for added saftey.
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM