Previous attempt got trolled to death - rotary racing advantages?
#51
Lives on the Forum
Originally Posted by V8Mongrel
Which is why he uses the process to check his suspension members.
Rotary engine vs everything else threads always find the rotary guys wearing rose colored glasses. The rotary is a neat and fundamentally different engine compared to a piston motor, but it does not have any real performance advantages over a piston motor. If it did poeple would be falling all over themselves to run rotary engines and all the piston motors would be in junkyards. You have to compare both sides equally and objectively. What ceramic coatings do for a rotary they do equally well for a piston motor. Ceramic coatings are not some silver bullet that makes the rotary superior.
I can certainly find some detail advantages to a rotary, but overall as a package it's at best equal to but most often inferior to piston engine installations IMO.
Last edited by DamonB; 05-22-06 at 10:51 AM.
#52
Old [Sch|F]ool
Originally Posted by V8Mongrel
Which is why he uses the process to check his suspension members. If the picture next to his name is indeed his car, I can assure you that are no non-ferrous suspension parts on that car from the factory.
There are methods for crack-checking aluminum, too. They use a dye instead of strong magnets.
#53
Rotary Enthusiast
Join Date: Apr 2001
Location: North Hollywood, Ca USA
Posts: 1,289
Likes: 0
Received 0 Likes
on
0 Posts
not trying to bust your *****. I know you were making a point that alot of top level race teams will test for cracks after each race(whether it is magnafluxing or dye crack testing). I think this has even gone out of vogue with most top level teams just replacing parts instead of testing or checking the old ones.
#54
Rotor Head Extreme
iTrader: (8)
Originally Posted by Nihilanthic
wranklin - what about under boost? :p
I know street 13bs tend to go 50K generally before compression starts to take a decline and need a rebuild,
I know street 13bs tend to go 50K generally before compression starts to take a decline and need a rebuild,
That is complete BS! Nothing on a 50k mile rotary is worn enough to warrant replacement or a rebuild unless something is broken. If you had ever taken apart and speced a high mileage rotary, you know that all the internal seals would be perfectly with-in spec. The internal seals (minus the 3 piece apex seals) will easily last over 150k with proper maintenance. What your experiencing is the carbon sticking of the seals from owners who only drive their cars less than 6k a year to keep their miles low. Carbon sticking is what lowers the compression due to stuck seals and granny driving. My stock Fd has over 104k on the original engine and turbos and will still trap 100 mph in the 1/4 mile as if it were brand new. If my engine was due for a rebuild over 50k miles ago care to explain why it's still running so well?
Sorry if I got a little animated, I just hate generalized non factual statements like that.
Last edited by t-von; 05-22-06 at 08:51 PM.
#55
Collections Hold
iTrader: (5)
Originally Posted by DamonB
...and the process is completely useless to any of us with aluminum suspension members
Rotary engine vs everything else threads always find the rotary guys wearing rose colored glasses. The rotary is a neat and fundamentally different engine compared to a piston motor, but it does not have any real performance advantages over a piston motor. If it did poeple would be falling all over themselves to run rotary engines and all the piston motors would be in junkyards. You have to compare both sides equally and objectively. What ceramic coatings do for a rotary they do equally well for a piston motor. Ceramic coatings are not some silver bullet that makes the rotary superior.
I can certainly find some detail advantages to a rotary, but overall as a package it's at best equal to but most often inferior to piston engine installations IMO.
Rotary engine vs everything else threads always find the rotary guys wearing rose colored glasses. The rotary is a neat and fundamentally different engine compared to a piston motor, but it does not have any real performance advantages over a piston motor. If it did poeple would be falling all over themselves to run rotary engines and all the piston motors would be in junkyards. You have to compare both sides equally and objectively. What ceramic coatings do for a rotary they do equally well for a piston motor. Ceramic coatings are not some silver bullet that makes the rotary superior.
I can certainly find some detail advantages to a rotary, but overall as a package it's at best equal to but most often inferior to piston engine installations IMO.
Well, cermet coating have a very certain advantage to us. For one, when building a race engine, typically one would buy two new rotor housings (or three!), which are about $450 each. JHB takes your worn out, or scared housing, machines it down, and coats cermet on the surface, then re-machines it. Total cost is $380 or so, so its CHEAPER to have a cermet housing than a new one. The rotary also has a much higher ratio of surface area to be subjected to heat, and more surface area for friction. So a Rotary with full cermet would have much higher % gains, than a cermet piston engine. The final problem is shock loads A.K.A., piston slap, makes cermet/ ceramic no so good for high performance piston engines, as its very hard and could crack. Just what I have read so far about it.
#56
Lives on the Forum
Originally Posted by GtoRx7
The rotary also has a much higher ratio of surface area to be subjected to heat, and more surface area for friction. So a Rotary with full cermet would have much higher % gains, than a cermet piston engine.
#57
moon ******
Thread Starter
Join Date: May 2005
Location: Jacksonville, Florida
Posts: 1,308
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by t-von
That is complete BS! Nothing on a 50k mile rotary is worn enough to warrant replacement or a rebuild unless something is broken. If you had ever taken apart and speced a high mileage rotary, you know that all the internal seals would be perfectly with-in spec. The internal seals (minus the 3 piece apex seals) will easily last over 150k with proper maintenance. What your experiencing is the carbon sticking of the seals from owners who only drive their cars less than 6k a year to keep their miles low. Carbon sticking is what lowers the compression due to stuck seals and granny driving. My stock Fd has over 104k on the original engine and turbos and will still trap 100 mph in the 1/4 mile as if it were brand new. If my engine was due for a rebuild over 50k miles ago care to explain why it's still running so well?
Sorry if I got a little animated, I just hate generalized non factual statements like that.
Sorry if I got a little animated, I just hate generalized non factual statements like that.
#58
Collections Hold
iTrader: (5)
Originally Posted by DamonB
Like I said, you have to think things through full circle. You know WHY the rotary has much higher % gains with cermet coating? Because it was so much worse to start with!!!! You cermet coat the rotary and make a big gain in heat rejection of the combustion chamber compared to before and yet you're still worse off than a piston motor.
#59
Lives on the Forum
Originally Posted by GtoRx7
I guess I am a optimistic guy. And when a engine, like the rotary is behind, I wont jump ship and badmouth it in the process.
I enjoy my rotary powered FD and I'm certain I race it more than nearly everyone here. I have a blast with my car. Just because I enjoy my car does not mean I automatically insist it be the most wonderful thing ever invented and ignore its faults. I insist the rotary is far from perfect compared to a piston motor but that doesn't mean I can't still have fun with my car. I must have a better therapist or something as it doesn't bother me to think this way
#60
Rotary Enthusiast
Originally Posted by DamonB
The rotary is a neat and fundamentally different engine compared to a piston motor, but it does not have any real performance advantages over a piston motor. If it did poeple would be falling all over themselves to run rotary engines and all the piston motors would be in junkyards. You have to compare both sides equally and objectively.
I'm not trying to claim that the rotary engine is the ultimate engine. I'm just clafiying that the fact the everyone does not use them has little to due with if they are "better" or not. The racing industry has a big interest is preserving the status quo and using the piston engines that are used in 99.9% of production vehicles.
#61
Lives on the Forum
Originally Posted by John Magnuson
. After Mazda won Lemans with a rotary the sanctioning body put very harsh restrictions on rotary powered race cars to ensure that it wouldn't happen again.
Originally Posted by John Magnuson
. The racing industry has a big interest is preserving the status quo and using the piston engines that are used in 99.9% of production vehicles.
#62
Lives on the Forum
Let's make a supposition:
The rotary is as good or better than a piston motor.
Okay. Got that? Now let's continue on:
Mazda builds rotary powered vehicles and has done so for decades. Mazda has developed several generations of rotary engines and knows more about them than anyone. If the rotary is so much better than a piston motor why does Mazda insist on shooting itself in the foot as you would claim by putting piston motors in 8 of the 9 platforms it currently offers? Afterall, the claim around here is always that other manufacturers haven't developed rotary motors and rather than take on that burden they use what they already have and understand; piston motors. Mazda on the other hand has developed rotary motors and yet they refuse to use them except in a single model.
Once again why not try thinking this through full circle and applying a little logic. Mazda has already taken on the burden of developing the rotary and yet they themselves refuse to install it in everything they sell save one model. Instead they suffer the expense to develop and manufacture piston engines for all of their other models. I suppose Mazda is just completely stupid. Instead of installing these rotary engines that are just as good (or better!) they're willing to take on all of the expense and overhead in developing and building different piston motors to stick in their cars. What a bunch of stupid idiots.
The rotary is not a better solution to a given problem. It's a marketing gimmick. If it were inherently better than a piston motor Mazda themselves would install them in every (or at least more than one!) car and truck they sell. Mazda itself would never tell you the rotary is a better motor than the piston; the cars they build prove that point.
Before everyone gets creative with their refute and starts inventing reasons and explanations they themselves can't even comprehend, ask yourself if you're smarter and better educated than the company who essentially designed and built the rotary in the first place. My money is on them.
The rotary is as good or better than a piston motor.
Okay. Got that? Now let's continue on:
Mazda builds rotary powered vehicles and has done so for decades. Mazda has developed several generations of rotary engines and knows more about them than anyone. If the rotary is so much better than a piston motor why does Mazda insist on shooting itself in the foot as you would claim by putting piston motors in 8 of the 9 platforms it currently offers? Afterall, the claim around here is always that other manufacturers haven't developed rotary motors and rather than take on that burden they use what they already have and understand; piston motors. Mazda on the other hand has developed rotary motors and yet they refuse to use them except in a single model.
Once again why not try thinking this through full circle and applying a little logic. Mazda has already taken on the burden of developing the rotary and yet they themselves refuse to install it in everything they sell save one model. Instead they suffer the expense to develop and manufacture piston engines for all of their other models. I suppose Mazda is just completely stupid. Instead of installing these rotary engines that are just as good (or better!) they're willing to take on all of the expense and overhead in developing and building different piston motors to stick in their cars. What a bunch of stupid idiots.
The rotary is not a better solution to a given problem. It's a marketing gimmick. If it were inherently better than a piston motor Mazda themselves would install them in every (or at least more than one!) car and truck they sell. Mazda itself would never tell you the rotary is a better motor than the piston; the cars they build prove that point.
Before everyone gets creative with their refute and starts inventing reasons and explanations they themselves can't even comprehend, ask yourself if you're smarter and better educated than the company who essentially designed and built the rotary in the first place. My money is on them.
#63
Rotary Enthusiast
Well now you're talking production street cars. I'd agree that you're probably better off with a piston engine in vehicles used on the streets. But this thread is about racing.
Last edited by John Magnuson; 05-24-06 at 01:00 PM.
#64
moon ******
Thread Starter
Join Date: May 2005
Location: Jacksonville, Florida
Posts: 1,308
Likes: 0
Received 0 Likes
on
0 Posts
I think its mutually accepted theyre not as high strung as a piston motor in NA racing, but Im still trying to find out about Turbo usage.
I have found through this thread that dealing with the heat produced is much more of a problem with turbo rotaries than turbo piston engines... but are they rebuilt any more or less frequently or at any more or less cost than a turbo piston engine?
I have found through this thread that dealing with the heat produced is much more of a problem with turbo rotaries than turbo piston engines... but are they rebuilt any more or less frequently or at any more or less cost than a turbo piston engine?
#65
Lives on the Forum
Originally Posted by Nihilanthic
Ibut are they rebuilt any more or less frequently or at any more or less cost than a turbo piston engine?
As for costs vs a piston engine it depends on the engine. A pushrod 2 valve 4 cylinder is of course going to be much cheaper to rebuild than a 32 valve DOHC v8.
#67
Collections Hold
iTrader: (5)
I was wondering, why are you mostly interested in turbo application in racing? From what I can see, between harsher rules for turbo (both rotary and non) more complex systems (rotary and non), and a much less user friendly race car to drive, most race cars are N/a. When at mid-ohio, I'd would go as far to say 98% of the race cars are n/a. So I was just curious, if your interested in entering racing on a spec class, or just want to know how a rotary stacks up in general?
#68
Collections Hold
iTrader: (5)
Originally Posted by DamonB
This is about engines and engines don't have feelings.
#69
moon ******
Thread Starter
Join Date: May 2005
Location: Jacksonville, Florida
Posts: 1,308
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GtoRx7
I was wondering, why are you mostly interested in turbo application in racing? From what I can see, between harsher rules for turbo (both rotary and non) more complex systems (rotary and non), and a much less user friendly race car to drive, most race cars are N/a. When at mid-ohio, I'd would go as far to say 98% of the race cars are n/a. So I was just curious, if your interested in entering racing on a spec class, or just want to know how a rotary stacks up in general?
#71
moon ******
Thread Starter
Join Date: May 2005
Location: Jacksonville, Florida
Posts: 1,308
Likes: 0
Received 0 Likes
on
0 Posts
I was referring to maintainance schedule and expenses (how often do you rebuild, and are they any diff than an NA rebuild...), and secondary and tertiary concerns (radiator, oil cooling, state-of-tune, pricing for different turbo sizes on a rotary vs a piston engine of equivilant displacement) and the like.
We all know a 13b will spool like a 2.6 liter piston motor with VERY healthy exhaust side flow and properly paried runners to the turbo basically out-of-the-box, so you can use a bigger turbo for that advantage, plus it has pretty good flow so you dont need to crank up the Pressure Ratio as high as you would on many other motors (stock headed anyway).
However, it takes more lbs-min of flow on a rotary to make the same ponies a piston will, granted its not an inefficient piston motor or the rotary isn't cermat coated (which more and more looks like the possible deus ex machina for rotaries) and for the concerns of wanting to keep the air charge cool you wanna go big with the turbo and relatively low with the pressure. I was just curious as to how this ends up changing costs and any impact on the rebuild frequency or expense per time.
We all know a 13b will spool like a 2.6 liter piston motor with VERY healthy exhaust side flow and properly paried runners to the turbo basically out-of-the-box, so you can use a bigger turbo for that advantage, plus it has pretty good flow so you dont need to crank up the Pressure Ratio as high as you would on many other motors (stock headed anyway).
However, it takes more lbs-min of flow on a rotary to make the same ponies a piston will, granted its not an inefficient piston motor or the rotary isn't cermat coated (which more and more looks like the possible deus ex machina for rotaries) and for the concerns of wanting to keep the air charge cool you wanna go big with the turbo and relatively low with the pressure. I was just curious as to how this ends up changing costs and any impact on the rebuild frequency or expense per time.
#72
Senior Member
Join Date: Nov 2004
Location: Fallston, MD
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DamonB
Let's make a supposition:
The rotary is as good or better than a piston motor.
Okay. Got that? Now let's continue on:
Mazda builds rotary powered vehicles and has done so for decades. Mazda has developed several generations of rotary engines and knows more about them than anyone. If the rotary is so much better than a piston motor why does Mazda insist on shooting itself in the foot as you would claim by putting piston motors in 8 of the 9 platforms it currently offers?
The rotary is as good or better than a piston motor.
Okay. Got that? Now let's continue on:
Mazda builds rotary powered vehicles and has done so for decades. Mazda has developed several generations of rotary engines and knows more about them than anyone. If the rotary is so much better than a piston motor why does Mazda insist on shooting itself in the foot as you would claim by putting piston motors in 8 of the 9 platforms it currently offers?
Originally Posted by Nihilanthic
We all know a 13b will spool like a 2.6 liter piston motor with VERY healthy exhaust side flow and properly paried runners to the turbo basically out-of-the-box, so you can use a bigger turbo for that advantage, plus it has pretty good flow so you dont need to crank up the Pressure Ratio as high as you would on many other motors (stock headed anyway).
I think the hot nature of the rotary means that turbo selection will have to be more critical and better suited to the pressure, airflow, and powerband of the engine. Or maybe the rotary guys need to start looking into pre-compressor water/meth injection... Honestly I don't know how many people in the RX-7 community have tried it.
#73
moon ******
Thread Starter
Join Date: May 2005
Location: Jacksonville, Florida
Posts: 1,308
Likes: 0
Received 0 Likes
on
0 Posts
Ok, a 2.6 liter with a good paired header, a wild exhaust side and cam, and really retarded spark timing. (Good approximation for the inefficiency a rotary has leading to its hotter exhaust gas... you should see just what you can get on a piston motor by retarding spark sometime when playing with turbos)
Though, you have a point, you do need a bigger turbo both in outright size and A/R - but you dont need necessarily to support a high pressure ratio. Then again, is there a reason nobody has ever tried to use stock ports and higher pressure ratios? Is detonation that much of a concern?
Though, you have a point, you do need a bigger turbo both in outright size and A/R - but you dont need necessarily to support a high pressure ratio. Then again, is there a reason nobody has ever tried to use stock ports and higher pressure ratios? Is detonation that much of a concern?
#74
Senior Member
Join Date: Nov 2004
Location: Fallston, MD
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nihilanthic
(Good approximation for the inefficiency a rotary has leading to its hotter exhaust gas... you should see just what you can get on a piston motor by retarding spark sometime when playing with turbos)
Originally Posted by Nihilanthic
Though, you have a point, you do need a bigger turbo both in outright size and A/R - but you dont need necessarily to support a high pressure ratio. Then again, is there a reason nobody has ever tried to use stock ports and higher pressure ratios? Is detonation that much of a concern?
Now, the thing is, a ported motor should have less pumping losses and therefore better efficiency than a stock motor. The fact that porting can also change port timing has double the effect (for instance, my car has a stock head with cams, and the cams helped overcome probably 85% of the inadequacies of the unported head). So with the right porting and turbo selection, pretty much everything in the system should be operating at a less demanding level.
It's kind of like back in the day with turbo cars, everyone just figured that there was no need to bother spending time or money on the head, because you could just turn up the boost. But then people started realizing that you didn't have to run as much boost if you make the engine breathe better. You start throwing in porting and cams and intake manifolds and now you're running down and to the right on the compressor map... the wrong direction. So then a new compressor wheel or even a whole new turbo must be considered to better suit the setup. Sure, maybe you could stick with the old turbo and max it out (34 lbs/min out of a small 16g at 20 psi? Damn near maxed out and then some!), but your compressor efficiency is likely crap and your IAT's are high.
I guess basically, it just makes more sense to run lower boost levels, and yes it's probably easier to control detonation (though I'm assuming the higher boost setup would offer better air/fuel mixture).
#75
Originally Posted by Nihilanthic
See, this is good info - now this is a thread that can go somewhere. THANK YOU!
I personally think a lot of the problem with adoption of rotaries and perceived credibility of them is one of the reasons theyre so liked by those that are in the know - they are very obscure and a lot of the real nitty gritty is hard to find. It definitely makes it special, but it means a lot of what should be "on the table" during discussion isn't.
BTW, why exactly can you use the lower octane and lower compression (relative to the piston engines) with a rotary? Is it because of the bathtub chamber design and knock resistance?
Also, just out of curiousity - in-class, what ends up being the biggest competetor to the 13bs out there? Honda motors? Duratechs? Quad Fours? Limas?
Furthermore, anyone got input about the classes that allow turbo motors?
I personally think a lot of the problem with adoption of rotaries and perceived credibility of them is one of the reasons theyre so liked by those that are in the know - they are very obscure and a lot of the real nitty gritty is hard to find. It definitely makes it special, but it means a lot of what should be "on the table" during discussion isn't.
BTW, why exactly can you use the lower octane and lower compression (relative to the piston engines) with a rotary? Is it because of the bathtub chamber design and knock resistance?
Also, just out of curiousity - in-class, what ends up being the biggest competetor to the 13bs out there? Honda motors? Duratechs? Quad Fours? Limas?
Furthermore, anyone got input about the classes that allow turbo motors?