FC AutoX setup with GC and KYB
06-22-05, 09:12 PM
#1
Full Member
Thread Starter
Join Date: Oct 2001
Location: Long Island, NY
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
FC AutoX setup with GC and KYB
I will be taking my autoX FC in to a race shop for corner balancing and alignment very soon. I'm looking for help with a good baseline setup for the car. I have Ground Control's alignment specs but I'm not sure if they are road race or autox
Is there a reccommended alignment for autoX with the following parts?
GC coilovers and camber plates with 400/250 springs
RB sways with Mtrix endlinks
KYB AGX
DTSS eliminated
Poly bushings all around
17*7.5 wheels with 225/45
What is a good baseline damping setting to run on these struts/shock with these spring rates?
Is there an optimal ride height for the coilovers to be set closest to? Maybe to retain certain geometries in the suspension? Is it 25" fender lip to ground?
TIA for any help.
Greg
Is there a reccommended alignment for autoX with the following parts?
GC coilovers and camber plates with 400/250 springs
RB sways with Mtrix endlinks
KYB AGX
DTSS eliminated
Poly bushings all around
17*7.5 wheels with 225/45
What is a good baseline damping setting to run on these struts/shock with these spring rates?
Is there an optimal ride height for the coilovers to be set closest to? Maybe to retain certain geometries in the suspension? Is it 25" fender lip to ground?
TIA for any help.
Greg
07-01-05, 01:16 AM
#2
i am not a girl
iTrader: (13)
Join Date: Aug 2001
Location: CT
Posts: 1,916
Likes: 0
Received 0 Likes
on
0 Posts
is this car driven on a street? try 1.5 deg of camber all around, slight toe out unless u hate when the car wonders on the road on the highway. rear a total toe of .30. go from there.
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM
