excessive oil "blow by" solutions?
08-19-05, 05:17 PM
#26
Full Member
Join Date: Jul 2005
Location: Melbourne
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Carl Byck
Thunderhill, no times, just working on debugging.It was a NASA event, 500+hp 914 700HP+GT40, 600hp+ corvette, 550hp Audi S4, all on slicks, that was a very fast group. I'd say ~15 cars in the group, 7 sessions for 179.00. I was really pleased with my temps, I think I can run a full session at 20 psi now without problems. Tighen I'll add water injection, and reliability will only get better. I am going to have to go to the high end hose clamps, those billet hinged pieces, the T bolts are not getting it done, maybe two T polts, and longer custom couplers with a double bead. T bolts hold O'k until you get them very hot, and oily, then, even T bolts slip. I am going to make some 4" couplers, this blowing hoses off is getting old... carl
Do you run a BOV?
Please let me know.
08-19-05, 06:56 PM
#27
Mad Man
Thread Starter
Originally Posted by RX7MONSTER
Carl, I have one question for yah.
Do you run a BOV?
Please let me know.
Do you run a BOV?
Please let me know.
08-20-05, 02:22 PM
#29
Mad Man
Thread Starter
Originally Posted by RX7MONSTER
Sweet, ever tried running it without a BOV? Make any differnces?
08-22-05, 12:33 PM
#31
Mad Man
Thread Starter
I used to run 20w50, but the heavier oils are not as conducive to keeping the turbo oiled according to ATP, and Precision. 30 wt helped eleminate my smoking turbo issues. carl
08-22-05, 03:20 PM
#32
Full Member
Join Date: Jul 2005
Location: Melbourne
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
I run 25W-70 HPR ( Penrite )..
I was told running anyless is not for a car making serious power.. Turbo lubrication was fine even at high loads.. How do you find your engine's oil pressure with such thi n oil??
I wouldnt use the oil you are using even on my SR20DET.. too thin
I was told running anyless is not for a car making serious power.. Turbo lubrication was fine even at high loads.. How do you find your engine's oil pressure with such thi n oil??
I wouldnt use the oil you are using even on my SR20DET.. too thin
08-22-05, 05:23 PM
#33
Mad Man
Thread Starter
Without getting into a huge debate, you are mis-informed. many of the 1200-1600hp Supras are running 30 weight. I am switching to Amsoil, and I will go with their recomendation most likely. My pressures are normal, 20idle, 60 mid throttle med. lad, and 80@WOT. The way the oil works is it gains viscosity as it heats up, and when it is subjected to increased pressures. Go to the Amsoil site for great technical info. 70 weight in a motor??? I've never seen or heard of such a thing. You, not me are waaayy outside the box on this one
Carl
Carl
08-23-05, 12:41 AM
#34
Full Member
Join Date: Jun 2003
Location: honolulu
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
oil pressure at 20psi, at idle, seems way to low to me. i start to get worried when my oil pressure drops below 40psi at idle, just because spec is about 40 in the manual. i would figure a high horespower motor running at high boost for extended periods of time would require a heavier weight oil. due to higher engine temps, wouldnt the oil break down faster or thin out due to it being a thinner weight oil? stuff like blowby gases carrying fuel into the oil. I would expect you to be changing oil every race day. i dunno just thinking to myself.
08-23-05, 05:06 PM
#35
Full Member
Join Date: Jul 2005
Location: Melbourne
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Every single rotary in australia uses HPR 40 which is 70w oil.... Im talking EVERY DAMN SINGLE ONE!
We are known to have kick *** car's in australia,but hey....
Whatever floats your boat, i will stick with 25-70w since every single workshop uses that!
Hell even my sisters daily driver TII uses SAE 20W -60
We are known to have kick *** car's in australia,but hey....
Whatever floats your boat, i will stick with 25-70w since every single workshop uses that!
Hell even my sisters daily driver TII uses SAE 20W -60
08-23-05, 05:09 PM
#36
Full Member
Join Date: Jul 2005
Location: Melbourne
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Carl Byck
Without getting into a huge debate, you are mis-informed. many of the 1200-1600hp Supras are running 30 weight. I am switching to Amsoil, and I will go with their recomendation most likely. My pressures are normal, 20idle, 60 mid throttle med. lad, and 80@WOT. The way the oil works is it gains viscosity as it heats up, and when it is subjected to increased pressures. Go to the Amsoil site for great technical info. 70 weight in a motor??? I've never seen or heard of such a thing. You, not me are waaayy outside the box on this one Carl
CarlI get readings of minimum 5kg/cm2 @ idle. and upto 8.5- 9.5kg/cm2 at WOT.
08-23-05, 05:49 PM
#37
Mad Man
Thread Starter
Just goes to show wha a wide range of set-ups will work. my motor has 15000 hard miles on it at least. About 30 hours of road racing in there as well.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
NCross
2nd Generation Specific (1986-1992)
9
09-03-15 03:42 PM
