air filter
#1
Full Member
Thread Starter
Join Date: Mar 2001
Location: Huntersville, NC
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
air filter
looking for a new air filter for my SCCA ITS car. currently i have a k&n cone, but it's too long and the wrong intake size (bigger than maf). what size is the maf? 2 3/4" dia? i was looking for a cotton cone like the bonez one sold at www.rx7.com buehler? anyone?
thanks,
mike
thanks,
mike
#3
Full Member
Join Date: Jun 2002
Location: Bay Area
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
2.5 is the 89+ FC Maf. You can get a transition pipe or a transition silicon hose and use a 2.75 or 3 inch filter. Both APEXi and HKS makes short intake filters, and both utilizes the velocity stacks.
#4
Full Member
Join Date: Mar 2001
Location: Central Florida
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Mike,
You might take a look at K&N for a universal tapered cone filter. My research showed a filter that might work, P.N. RU-3560. Here's the specs:
Filter length - 6"
Mounting flange ID - 2.5"
Frt edge OD - 4 5/8"
Back edge OD - 5 1/8"
Flange - 5/8" tall, centered
I haven't tried it yet, but it looks like an option. If you want to give it a shot, let me know. Priced well too at less than $40.
Chris Wire
team@racecareng.com
You might take a look at K&N for a universal tapered cone filter. My research showed a filter that might work, P.N. RU-3560. Here's the specs:
Filter length - 6"
Mounting flange ID - 2.5"
Frt edge OD - 4 5/8"
Back edge OD - 5 1/8"
Flange - 5/8" tall, centered
I haven't tried it yet, but it looks like an option. If you want to give it a shot, let me know. Priced well too at less than $40.
Chris Wire
team@racecareng.com
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM