Power FC What is your Power FC water temp when the fans come on?
I have a related question. I was driving around today and my PFC reported temp varied from 100-104. When I was up on the highway going steadily over 60 the temps stayed at about 100-101. Does this mean:
1) PFC temps are not accurate and I need to get a real temp gauge to calibrate the powerfc
2) My thermostat does not open until I am over 100 C
3) My fans don't come on early enough (I doubt because of highway temps)
4) None of the above
If it is 1) what is a good, cheap, easy way to find out what the actual temperature is?
1) PFC temps are not accurate and I need to get a real temp gauge to calibrate the powerfc
2) My thermostat does not open until I am over 100 C
3) My fans don't come on early enough (I doubt because of highway temps)
4) None of the above
If it is 1) what is a good, cheap, easy way to find out what the actual temperature is?
1JZ powered
Joined: Jul 2001
Posts: 4,423
Likes: 0
From: Where there's only two seasons, hot and wet! I love Okinawa
Originally posted by Tom93R1
I have a related question. I was driving around today and my PFC reported temp varied from 100-104. When I was up on the highway going steadily over 60 the temps stayed at about 100-101. Does this mean:
1) PFC temps are not accurate and I need to get a real temp gauge to calibrate the powerfc
2) My thermostat does not open until I am over 100 C
3) My fans don't come on early enough (I doubt because of highway temps)
4) None of the above
If it is 1) what is a good, cheap, easy way to find out what the actual temperature is?
I have a related question. I was driving around today and my PFC reported temp varied from 100-104. When I was up on the highway going steadily over 60 the temps stayed at about 100-101. Does this mean:
1) PFC temps are not accurate and I need to get a real temp gauge to calibrate the powerfc
2) My thermostat does not open until I am over 100 C
3) My fans don't come on early enough (I doubt because of highway temps)
4) None of the above
If it is 1) what is a good, cheap, easy way to find out what the actual temperature is?
Either way, the datalogit software/hardware is the SH*T. My water temps get to about 95 with a FMIC and HEAVY WOT runs.
Banned. I got OWNED!!!
Joined: Nov 2001
Posts: 1,571
Likes: 0
I have a billion Fan controller from my web page, and I can set my water temps at what ever I want, but I set the max at 88c for right now..
Jason
JT-Imports
Yokohama Japan
www.jt-imports.com
Jason
JT-Imports
Yokohama Japan
www.jt-imports.com
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
befarrer
Microtech
3
Aug 22, 2015 05:52 PM
