I recently purchased an RP rail + 2200cc Bosch secondaries.

I believe I'm running PFC "Base Mod Map" (purchased the PFC a couple months ago).

What should I expect after installing the new rail and injectors?

I'm pretty much completely new to PFC and tuning in general. I just hooked up my Datalogit today and explored a bit, and will be giving the manual a read-through this weekend. Any help getting the car idling & running safely would be much appreciated. I don't need it to run well, just safely and well enough to make it 500 miles to the tuner in a few weeks.

 

If the car is running and idling now it should be fine with the 2200's. Update the secondary injector settings through the datalogit with the figures provided from RP then get it tuned. I went through the same setup.

 

You're right that the injectors came with a spec sheet, and right at the top of that sheet it says "Settings page #6 in Datalogit"

Thanks for pointing me to the "right in front of your face" department...

That is really cool that the numbers in the injector map are symbolic/abstracted, though!