Power FC Water temp

Reply Subscribe

Thread Tools

Search this Thread

Aug 23, 2012 | 01:02 PM

xshawn801x

Thread Starter

Full Member

iTrader: (7)

Joined: Mar 2004

Posts: 242

Likes: 1

From: SL, UT

Water temp

Where does the power fc get its water temp from? Is it the sensor on the water fill neck? Mine reads like 37*c when I've been driving for 30 mins and my stock dash gauge just buzz's at me. Is my sensor bad?

Aug 23, 2012 | 03:25 PM

xshawn801x

Thread Starter

Full Member

iTrader: (7)

Joined: Mar 2004

Posts: 242

Likes: 1

From: SL, UT

It acts like its reading backwards, started my car an on the commander it read 42*c let it idle for a min and now it says 36*c

Aug 23, 2012 | 06:30 PM

Banzai-Racing

Rotary Specialists

iTrader: (11)

Joined: Jan 2008

Posts: 4,868

Likes: 344

From: Indiana

Sounds like you have your fuel temp connector on the water thermosensor. They are the same green connector, swap them and see if your problem goes away.

Aug 23, 2012 | 09:43 PM

xshawn801x

Thread Starter

Full Member

iTrader: (7)

Joined: Mar 2004

Posts: 242

Likes: 1

From: SL, UT

I'll try it thanks!

Aug 26, 2012 | 07:34 AM

xshawn801x

Thread Starter

Full Member

iTrader: (7)

Joined: Mar 2004

Posts: 242

Likes: 1

From: SL, UT

That was it! Thank you very much

Reply Subscribe