As some of you may know, I have put together a supplementary document explaining some of the small installation and tuning differences when using the PFC on an FC. I also have a handy appendix with pinouts and configuration procedures for your TPS.

I recently corrected and updated the section on using the PFC to control an electric fan, including a description of how the PFC controls the temperature switchpoints to maintain the desired temperature. I also have inserted some commentary on using the INJ vs TPS 1 table for improved throttle response/tip-in , including some sample settings to try.

http://www.geocities.com/arghx/PowerFC.FC3S.Tuning.doc

 

Link doesnt work? Do you still have that by chance? Thanks

 

.

 

https://docs.google.com/fileview?id=...MTkxODA2&hl=en

here is the new location

 

Thanks alot.

 

thanks bro!

 

Thank you for taking the time to write that up. I'm waiting for my 1000cc injectors and the additional trailing coil so I can install my PowerFC next week and this was very helpful.

B

 

^ Are you planning on tuning it yourself or are you taking it to someone?

 

Arghx,

I'm taking it to a local rotary tuner with a dyno.

B

 

After reading through the PowerFC forum I went ahead and ordered the Datalogit. I'm reading up on everything now to get acquainted with the PFC. Still waiting for injectors and downpipe to come in, but the trailing coil mod is done and in, along with AIT and 3Bar MAP. Tomorrow I'm wiring up the electric fan relay, LC-1 wideband and trigger wire.