can a avcr boost siloniod work with the pfc? if so how do i run it? thanks, jason

 

If it's just the solenoid alone, yes it can connect, no it doesnt work that well.

If it's the FULL AVCR kit, then it works well.

Fish

 

The solenoid is identical to the one in the Apexi Boost Control Kit for the PFC.
I had success using the PFC to control boost on sequential twins with the stock solenoids.

I would recommend just using the PFC to control boost, if that does not work you may want to switch to a different boost controller.

When I went single I used the Apexi solenoid and PFC to control boost, however I had slight oscillations in boost.

You can find out how to route the boost lines for the solenoid on the Apexi USA website.

 

Yeah but the electrical connection is not totally intuitive. You need to hook up to the pre-control solenoid connection.