anyone got any andvice on how i can make my ac work with the power fc?

 

In order of most effective

Replace the harness
Check the system for irregularities
Clean the switch contacts
Hard wire it

There are a lot of threads full of hearsay, but I think it comes down to the low variance that apexi set their parameters at that really gets everyone.

Is it just certain settings that it doesn’t work on or just entirely does not work?

 

it entirely doesnt work. i heard of people saying it doesnt work on 3 but mines just completly doesnt work.

 

Hard wire it. I did mine and it blows ice cold air like stock operation on all settings. The only thing you need to remember is to reach over and turn off your AC (depress button) when going WOT on those Friday and Saturday night hard throttle romps!

 

how do you hard wire it?

 

See below, was posted by me in 2001!

 

so you just connect the two wires together?

 

Basically, cut them at the ECU and only connect the two on the harness side.

 

https://www.rx7club.com/showthread.p...=1#post4351911

 

I just remembered that I placed a pressure switch in my A/C clutch line that would open up at 2psi boost and thus automatically turn off the A/C while on boost.

 

Do you have the part number and where to get the switch ?