Power FC Power FC with my setup
#1
Junior Member
Thread Starter
Join Date: Aug 2004
Location: Near by
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Power FC with my setup
How far to the woods I will end up with this system.
I have Jap-spec FD and I was planning the follofing setup
Single turbo (T67 or T78), 850cc primarys, 1600cc secondarys with Rotary Extreme "extreme fuel system" walbro fuel pump, GReddy Profec B-Spec II boost controller.
If I have understood it correctly PFC works just fine with single turbo setup and secondary injectors?
Is there anything that I might not been thought of?
Thanks
-DriftRX7
I have Jap-spec FD and I was planning the follofing setup
Single turbo (T67 or T78), 850cc primarys, 1600cc secondarys with Rotary Extreme "extreme fuel system" walbro fuel pump, GReddy Profec B-Spec II boost controller.
If I have understood it correctly PFC works just fine with single turbo setup and secondary injectors?
Is there anything that I might not been thought of?
Thanks
-DriftRX7
#2
PFC should handle that fine, but you'll need the datalogit. I don't think you can program in 1600's without it. But you'll want one anyway once you mod a car that much...
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
08-31-15 07:49 PM