Power FC PFC Settings. [Injectors]
Thread Starter
Junior Member
Joined: Mar 2002
Posts: 38
Likes: 0
From: IN
PFC Settings. [Injectors]
Hi guys new to the forum and have some questions about the PFC I want to ask.
On the "Injectors" setting of my PFC it says 100% on the primary injectors and it didn't say anything on the secondary injectors, is that right? or the guy who tuned the PFC before messed up? Thanks!
On the "Injectors" setting of my PFC it says 100% on the primary injectors and it didn't say anything on the secondary injectors, is that right? or the guy who tuned the PFC before messed up? Thanks!
There is no PERCENTAGE entry for the secondaries. Thus it was not messed up by the previous owner.
The PERCENTAGE entry for the primaries is used when
either replacing them with a different size or if they are not flowing their standard flow rate.
The PFC manual explains this. If you do not have it, get it from this forum.
The PERCENTAGE entry for the primaries is used when
either replacing them with a different size or if they are not flowing their standard flow rate.
The PFC manual explains this. If you do not have it, get it from this forum.
Thread
Thread Starter
Forum
Replies
Last Post