Power FC Need input, is it possible to get 18 psi on the power fc
Thread Starter
Senior Member
Joined: Apr 2001
Posts: 279
Likes: 0
From: Philadelphia
Need input, is it possible to get 18 psi on the power fc
I will be going to KDR at the end of this month to get my car dyno and tune to 18 psi using Apexi Power FC and AVCR. Dave at KD told me that it is possible to run the power FC and AVCR to get 18 psi without the boost control kit. I have heard many members on the forum saids that you can only go up to 15 psi on the power fc and anything beyond it you will have to get the boost control kit and others stated that you can boost up to 18 or 20 psi and varies.
Senior Member
Joined: Mar 2001
Posts: 287
Likes: 0
From: aloha,OR.Usa
20 PSI
I am running 20 PSI on the street with the PFC,550cc@1300cc
injectors,AVCR,and maps from XS engineering with no problem
so far. My dyno's Wideband O2 shows 11:1 AF all the way up
to 7500 RPM with no problem. My turbo is a XS TO4S.
Xcessive
injectors,AVCR,and maps from XS engineering with no problem
so far. My dyno's Wideband O2 shows 11:1 AF all the way up
to 7500 RPM with no problem. My turbo is a XS TO4S.
Xcessive
Passenger
Posts: n/a
I'll tell you if you give me your extra tail lights. J/K Utilizing the AVC-R will bypass the Apexi PFC's limited solenoid, you know what I'm saying beeeeeeeeeeee?
Go 20psi, you've got the stuff you need to do it, fuel, with the new prt and seals.
Go 20psi, you've got the stuff you need to do it, fuel, with the new prt and seals.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM