Power FC Forum Apex Power FC Support and Questions.

Power FC maps for PFC

Thread Tools
 
Search this Thread
 
Old Aug 24, 2008 | 02:35 PM
  #1  
Perry9394's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (2)
 
Joined: Sep 2007
Posts: 165
Likes: 0
From: Vancouver BC
Wink maps for PFC

any one has a tuned map for twin turbo setup?

i can get anyone locally to tune my PFC, seems like on one is familiar with rotary engine with PFC and has a dyno locally, all i have is intake, upgraded SMIC, downpipe and exhaust, thx for sharing.
Reply
Old Aug 28, 2008 | 05:06 PM
  #2  
koolmoe's Avatar
outside agitator
iTrader: (1)
 
Joined: Jul 2008
Posts: 66
Likes: 0
From: Vancouver Canada
Staff auto in North Van Tune. Heard nothing but good things.

I believe ForceFed in Langley may have a dyno (not sure on that one). Marco (the owner) is certainly known for building fast engines.

Isn't the Mod Map that comes with the PFC already tuned for your setup? I guess you could always get it tweaked to perfection...


Let me know how the tuning goes, I will have basically the same setup once I install the PFC.
Reply
Old Aug 28, 2008 | 05:26 PM
  #3  
Perry9394's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (2)
 
Joined: Sep 2007
Posts: 165
Likes: 0
From: Vancouver BC
ya, too bad i dun even have the base map, and i dunno where i can get it.
Reply
Old Sep 1, 2008 | 02:32 AM
  #4  
proz07's Avatar
looking for 82-83 corolla
Tenured Member 05 Years
iTrader: (6)
 
Joined: Aug 2005
Posts: 451
Likes: 0
From: ar
if your still running stock boost the base map on the pfc will work just reset it via the PFC manual. if nothing else you can stay out of boost to get it to the tunner if you dont trust it.

z
Reply
Old Sep 1, 2008 | 10:29 AM
  #5  
cewrx7r1's Avatar
Eye In The Sky
Tenured Member: 25 Years
iTrader: (2)
 
Joined: Feb 2001
Posts: 7,941
Likes: 133
From: In A Disfunctional World
Originally Posted by Perry9394
ya, too bad i dun even have the base map, and i dunno where i can get it.
If you re-initilaize the PFC, it defaults to the base mod map.
That means it removes any tuner changes or your changes and all goes back to the hard coded base map.
Reply
Old Sep 1, 2008 | 02:22 PM
  #6  
Perry9394's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (2)
 
Joined: Sep 2007
Posts: 165
Likes: 0
From: Vancouver BC
i think i can initialize the PFC vis the data logic, and there're also a sample 13B-NEW map on the datalogic CD, just dunno if that's a new version, updated map from Apexi, or just stock map.
Reply
Old Sep 1, 2008 | 07:08 PM
  #7  
apeiron
Tenured Member 20 Years
iTrader: (2)
 
Joined: Oct 2002
Posts: 1,771
Likes: 0
From: Boulder, CO
https://www.rx7club.com/power-fc-forum-47/can-not-get-afrs-above-12-2-datalogit-780543/

I attached a file in one of my posts on that thread. This map was used to tune my car afew months ago. Mods include:

Intake, FMIC, Upgraded Fuel Pump, Stock Primary + Secondary Injectors, Downpipe, Straight Through Pipe, Upgraded Muffler, Koyo Rad


Tune was for 13 - 14 PSI @ 297 rwhp --- I am not responsible for what you do with that map
Reply
Old Sep 1, 2008 | 07:34 PM
  #8  
dradon03's Avatar
Derwin
Tenured Member 10 Years
iTrader: (2)
 
Joined: Apr 2005
Posts: 2,888
Likes: 0
From: MTL, QC
Originally Posted by Perry9394
i think i can initialize the PFC vis the data logic, and there're also a sample 13B-NEW map on the datalogic CD, just dunno if that's a new version, updated map from Apexi, or just stock map.
This sample map is good enough for what you are running.
Reply
Old Sep 27, 2008 | 07:23 PM
  #9  
Perry9394's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (2)
 
Joined: Sep 2007
Posts: 165
Likes: 0
From: Vancouver BC
Originally Posted by spoolage
https://www.rx7club.com/showthread.php?t=780543

I attached a file in one of my posts on that thread. This map was used to tune my car afew months ago. Mods include:

Intake, FMIC, Upgraded Fuel Pump, Stock Primary + Secondary Injectors, Downpipe, Straight Through Pipe, Upgraded Muffler, Koyo Rad


Tune was for 13 - 14 PSI @ 297 rwhp --- I am not responsible for what you do with that map


thz, i will try ur maps, but i am currently running the sample map from the datalogic cd, it's very good on gas, i run 94 octane and get ~350km/tank city/hwy mix. however the map is set for 850cc primaries and 1300cc secondaries.

*btw, anyone here have any tuned maps for twins to share, so me and the others can compare ours maps to urs for tuning references?

Last edited by Perry9394; Sep 27, 2008 at 07:48 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Einheri
Single Turbo RX-7's
14
Oct 7, 2015 12:23 PM
spokanerxdude
Megasquirt Forum
3
Oct 6, 2015 12:28 PM
baix2
Power FC Forum
1
Sep 28, 2015 09:40 AM




All times are GMT -5. The time now is 07:19 AM.