FatDave747

Hey everyone, I just got a PowerFC (thnx Eric) and was wondering if anyone has some maps that I can use for my car. My mods are listed in sig. I am running on a non-ported motor with about 10k miles on it. Any help would be greatly appreciated.

thanks,
dave

DavidDeco

You may want to be careful using anyone elses maps. I would suggest going to MAPS part of this forum and finding someone with similar mods as a starting point. I got a a good start out this way and have since tuned it up.

You really want to get some wideband A/F readings before you start playing with modified maps. I would suggest you look into getting the Datalogit and gain access to a shop or person with an accurate A:F reader.

It can be dangerous to rely on someone else's maps.

jamespond24

iTrader: (13)

I tried the maps forum but for some reason it took me to some microsoft page and it said I needed to use the excel spreadsheet file? Is there any other program that I could use the download the maps?

cewrx7r1

iTrader: (2)

The only power producing mods that you list are IC, DP, and cat back. You can run stock timing and probably even stock fuel. If you want to be safe until the AFRs are verified, add 2% fuel to the PIM pressure menu for the three highest voltages.

jamespond24

iTrader: (13)

What do I need to download the power fc maps in this forum, like what kind of file?

FatDave747

With the base maps, how much boost can I run up to?

cewrx7r1

iTrader: (2)

They are in Excel and that is what you need.

DavidDeco

I'd venture to say 12psi. Maybe more , maybe not.