Power FC Forum Apex Power FC Support and Questions.

Power FC Installed Pfc,car wont start

Thread Tools
 
Search this Thread
 
Old Jan 8, 2007 | 04:27 PM
  #1  
HKNY's Avatar
Thread Starter
Thou Shall Search
Tenured Member 15 Years
iTrader: (2)
 
Joined: Oct 2006
Posts: 462
Likes: 0
From: NY
Installed Pfc,car wont start

I bought a used Pfc for my FD a week ago off the forums and i installed it today.I read all the instructions,cut the correct wires(triple checked) reinitialized before i turned the key.And then it cranked and cranked to no avail.The injectors were getting a pulse but i didnt know if you could check for spark with the commander.I swapped the Pfc for the stock ecu and the car fired right up. My only mods are a trust catback and a high flow cat. im going to test for spark tomm, any other ideas?
Reply
Old Jan 8, 2007 | 05:35 PM
  #2  
nashman69g's Avatar
Boost Addict
Tenured Member 20 Years
iTrader: (3)
 
Joined: Nov 2001
Posts: 1,898
Likes: 13
From: Metairie, LA near new orleans
u may have a bad pfc!
Reply
Old Jan 8, 2007 | 06:32 PM
  #3  
HKNY's Avatar
Thread Starter
Thou Shall Search
Tenured Member 15 Years
iTrader: (2)
 
Joined: Oct 2006
Posts: 462
Likes: 0
From: NY
FFF ill try again tommorrow
Reply
Old Jan 8, 2007 | 07:46 PM
  #4  
mono4lamar's Avatar
In the burnout box...
Tenured Member 10 Years
iTrader: (32)
 
Joined: Oct 2003
Posts: 4,453
Likes: 2
From: New York
check for spark... get a spark plug simulator at advance or autozone. then check to see if you have fuel pressure. you also might want to get in touch with the previous owner quick! where in ny are you?
Reply
Old Jan 8, 2007 | 10:14 PM
  #5  
HKNY's Avatar
Thread Starter
Thou Shall Search
Tenured Member 15 Years
iTrader: (2)
 
Joined: Oct 2006
Posts: 462
Likes: 0
From: NY
yea im going to go through the whole series of tests in the morning. i contacted the guy i got it from and im waiting to hear from him. im in long island.
Reply
Old Jan 9, 2007 | 09:37 AM
  #6  
Jodeny's Avatar
Indifferent
Tenured Member: 25 Years
iTrader: (3)
 
Joined: Mar 2001
Posts: 982
Likes: 0
From: Long Island,NY
When you turn the key to on you should hear the solenoids click, as well as some actuators. If they don't, check to make sure the yellow plugs in the PFC are plugged in tightly. If still no clicking.....borrow a PFC from someone on the island.
John
Reply
Old Jan 9, 2007 | 09:56 AM
  #7  
HKNY's Avatar
Thread Starter
Thou Shall Search
Tenured Member 15 Years
iTrader: (2)
 
Joined: Oct 2006
Posts: 462
Likes: 0
From: NY
well i went out this morning to try it out again,i reconnected the snipped wires to the connectors and plugged the pfc back in.I looked at the sensor screen and it had the same ones up.Fuel pump went on when i cranked ,i saw the injectors were getting pulse.I then pulled a spark plug to check for spark/fuel. But the ceramic broke on the plug but the plug was abit damp and smelled of fuel.im going to the store to find a new plug and try for spark.thank for the help so far guys
Reply
Old Jan 9, 2007 | 11:39 AM
  #8  
HKNY's Avatar
Thread Starter
Thou Shall Search
Tenured Member 15 Years
iTrader: (2)
 
Joined: Oct 2006
Posts: 462
Likes: 0
From: NY
i've got spark,i've got fuel + i've got new plugs. No start with Pfc.Swapped stock computer in, fired right up. Does that mean Pfc is shot?
Reply
Old Jan 9, 2007 | 01:29 PM
  #9  
Jodeny's Avatar
Indifferent
Tenured Member: 25 Years
iTrader: (3)
 
Joined: Mar 2001
Posts: 982
Likes: 0
From: Long Island,NY
Sounds like it. Since the PFC was used- it may not have an appropriate map. Did you reinitialize it?
John
Reply
Old Jan 9, 2007 | 03:12 PM
  #10  
HKNY's Avatar
Thread Starter
Thou Shall Search
Tenured Member 15 Years
iTrader: (2)
 
Joined: Oct 2006
Posts: 462
Likes: 0
From: NY
yea i reinitialized it a couple times and before i ever turned the key.I did the whole initialize, turn ignition off then back on.Car runs perfect with stock ecu.I was driving all day no problem.
Reply
Old Jan 9, 2007 | 06:52 PM
  #11  
mono4lamar's Avatar
In the burnout box...
Tenured Member 10 Years
iTrader: (32)
 
Joined: Oct 2003
Posts: 4,453
Likes: 2
From: New York
what version fc edit are you using? though that preloaded map should still fire it right up. pretty confusing to say the least. see if you can make a friend with another pfc and if it starts up its time to get a refund. hopefully you did paypal...
Reply
Old Jan 9, 2007 | 08:38 PM
  #12  
HKNY's Avatar
Thread Starter
Thou Shall Search
Tenured Member 15 Years
iTrader: (2)
 
Joined: Oct 2006
Posts: 462
Likes: 0
From: NY
timing??
Reply
Old Jan 10, 2007 | 02:32 PM
  #13  
HKNY's Avatar
Thread Starter
Thou Shall Search
Tenured Member 15 Years
iTrader: (2)
 
Joined: Oct 2006
Posts: 462
Likes: 0
From: NY
Bueller?.............Bueller?
Reply
Old Jan 10, 2007 | 03:25 PM
  #14  
nashman69g's Avatar
Boost Addict
Tenured Member 20 Years
iTrader: (3)
 
Joined: Nov 2001
Posts: 1,898
Likes: 13
From: Metairie, LA near new orleans
Rooney! ........Your car should start with the PFC. I would:
1: find someone local who has a PFC and try it.
2: Try your PFC in their car to see if it works
3: Get some beer and chips
Reply
Old Jan 10, 2007 | 03:58 PM
  #15  
93FD3S's Avatar
Big Snail
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 1,230
Likes: 3
From: San Antonio
Hey bro if that one turns out bad I have one for sale bro. Let me know...!!
Reply
Old Jan 10, 2007 | 04:34 PM
  #16  
HKNY's Avatar
Thread Starter
Thou Shall Search
Tenured Member 15 Years
iTrader: (2)
 
Joined: Oct 2006
Posts: 462
Likes: 0
From: NY
thats what im gonna do next, ill know tommorrow. thanks tony
Reply
Old Jan 11, 2007 | 08:00 PM
  #17  
TK1999's Avatar
Lost Dog
Tenured Member 05 Years
 
Joined: May 2004
Posts: 150
Likes: 0
From: San Jose, CA
Sorry to hear, let us know how it turns out .
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
torky007
3rd Generation Specific (1993-2002)
7
Aug 17, 2015 05:14 PM
ashleymiche
Introduce yourself
0
Aug 14, 2015 12:59 PM
gabescanlon
Interior / Exterior / Audio
1
Aug 11, 2015 05:59 PM




All times are GMT -5. The time now is 04:52 PM.