Power FC INJ Map & Base Map For 850/1600 Setup For PFC
INJ Map & Base Map For 850/1600 Setup For PFC
I need the INJ map and Base map for a 850/1600 setup for the Power FC. I am running the Datalogit software. This is all I need to tune!!! 
I've already looked on the Yahoo groups and there is no such file there.
Thanks!

I've already looked on the Yahoo groups and there is no such file there.
Thanks!
Roy,
you can do a recalc with what you have and start re-tuning from there. I assume you were already tuned with the smaller injectors, right?
If so I expect you will take out quite abit of fuel on the low end such as idle and cruise. The rest of the map will need work but it should be manageable.
Inj overlap needs to be setup right, past threads have this explained well ... prevents the lean transition with the 1600s.
Good luck,
you can do a recalc with what you have and start re-tuning from there. I assume you were already tuned with the smaller injectors, right?
If so I expect you will take out quite abit of fuel on the low end such as idle and cruise. The rest of the map will need work but it should be manageable.
Inj overlap needs to be setup right, past threads have this explained well ... prevents the lean transition with the 1600s.
Good luck,
Originally Posted by Roy Johnson Jr
I need the INJ map and Base map for a 850/1600 setup for the Power FC. I am running the Datalogit software. This is all I need to tune!!! 
I've already looked on the Yahoo groups and there is no such file there.
Thanks!

I've already looked on the Yahoo groups and there is no such file there.
Thanks!
Trending Topics
http://bdc.cyberosity.com/v/Technica...d/PowerFCMaps/
First file there. Make sure you use the proper base map and also make sure the map you're using is set for the correct MAP sensor (check Settings 5 tab).
B
First file there. Make sure you use the proper base map and also make sure the map you're using is set for the correct MAP sensor (check Settings 5 tab).
B
Cool thanks man i really needed help. btw I dont have a datalogit i have to do everything on the power comander will that still work and i think my igl and igt map are fucked cause my idle is rough and the car wants to die.Also I am at about 4300ft elevation i know that makes a diff but like i said i am totally awesturck by this ECU thing. Again any help is much apprecatied
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM







