I'd like to look over all the base settings for the Power FC, but I couldn't find anything on this forum. I thought there were a bunch of sticky threads with this stuff, but I can't find them.

Can someone point me in the right direction? In particular I'm interested in the water temp adjustment maps. But surely there's an Excel file with all this stuff in it from the base maps.

Thanks!
Wade

 

The powerfc has the base map on it.

thewird

 

Mine doesn't... Which is why I'd like to compare it with the base maps.

Thanks,
Wade

 

Every PowerFC has the base map on it, no such thing as yours doesn't. You just need to initialize it to load the base map on it. You can do it from both the commander and the datalogit. Just remember to save your map first before doing it (if you care to load it back on after) since it will wipe whatever is currently on there and load the base map.

thewird

 

That's just it, I don't want to init the PFC and lose my maps. I don't have a datalogit or any way to save what's there. Surely the base settings have been put into excel or screenshots a hundred times by now. I just can't find it.

Wade

 

Considering the DATALOGIT came out in 1999, most of us have moved onto it and only use some EXCEL worksheets for making tuning easier.

You do not need a DL in order to use its software for map editing on a computer.

If you want access to different maps, the DL & PFC software, and best PFC tuning notes, PM arghx.

 

OK. Would someone mind just posting the base Water Temp Correction values? That's really all I'm interested in.

Thanks,
Wade

 

the default correction values are

1.000 - 1.000
1.078 - 1.016
1.297 - 1.219
1.578 - 1.500
2.016 - 1.875
2.813 - 2.578

 

Great, thanks a lot!!

Wade