my EGTs are telling me i need to richen the front rotor or lean out the back...
settings 5 might be the place. any ideas?

thanks,

howard coleman

 

From memory, you can add fuel to one rotor by changing the lag or the injector size. To make one of the primaries delivery more fuel, input a number greater than 100 in the Inj Size Adjust field for that primary. Or just put in a larger lag number for either the primary or seconday injector on the rotor you want to thro more fuel at.

Again, this is from memory, I hope I don't have it backwards.

 

thanks for the response and Charles, thanks for your response on the datalogit board. i will report back as to how it works. i am needing to equalize about 100 degrees F between the rotors measured preturbo.

howard coleman