Power FC high duty cycles!
#1
Eats, Sleeps, Dreams Rotary
Thread Starter
high duty cycles!
If i get higher boost due to cooler weather i am seeing 93-94% duty cylces..this scares me! What can i do to run say 13psi and lower thhe injector duty cycle. Can i upgrade the fuel pump or do i upgrade injectors? if i run bigger injectors do i need to upgrade the primary, secondary or both? I really do not want to upgrade the injectors till i get an IC. Currently moy mods are full exhaust, cold air intake, and power fc.
Thanks.
Matt
Thanks.
Matt
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
Run a search, this has been talked about much on this forum.
You only need a bigger fuel pump if the pressure is dropping due to the volume of fuel being consumed.
The same principles apply to carbs as fuel injection.
You only need a bigger fuel pump if the pressure is dropping due to the volume of fuel being consumed.
The same principles apply to carbs as fuel injection.
Thread
Thread Starter
Forum
Replies
Last Post