Power FC HELP! Power fc install now mph in sync with tach
Thread Starter
Junior Member
Joined: Sep 2013
Posts: 8
Likes: 0
From: Raleigh nc
HELP! Power fc install now mph in sync with tach
Anyone know what the deal could be? After I installed my power fc my mph sits a 20mph while sitting still.... I reinstalled my stock one and have no problems
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Sorry man..Rules are Rules and you keep bumping when you are not allowed to Bump threads in this section.(See Rules Stickied above in this New Member's Tech section)
There is a whole PFC section you can ask about or research this problem,so Kindly use feel free to use it.This is a specialized kind of problem that they are more familiar with and this section is for basic "stock type" car problems.
Good luck to ya.
Further Edit:This Thread is now COPIED and IN the PFC section..again good luck to ya
There is a whole PFC section you can ask about or research this problem,so Kindly use feel free to use it.This is a specialized kind of problem that they are more familiar with and this section is for basic "stock type" car problems.
Good luck to ya.
Further Edit:This Thread is now COPIED and IN the PFC section..again good luck to ya
Thread Starter
Junior Member
Joined: Sep 2013
Posts: 8
Likes: 0
From: Raleigh nc
Trending Topics
I have seen this problem posted, but I have never seen anyone post a solution. The there is a tach signal at pin 2B, try depinning that wire from the connector. This way if the problem is not solved you can just reinstall it.
